Re: Recognizing a USB DVB-T receiver

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



Lurka wrote:
Hello,
I bought the TwinhanDTV Hurricane USB DVB-T & Analog TV receiver. When
I plug it in, no "found new hardware" message is displayed and the
setup software does not detect the device.

The PC is compliant with all the requirements and it is strange that
connecting a USB device does not trigger any hardware setup at all. I
suspect the receiver may be malfunctioning. Is there any specific test
I can do before returning it to the shop?

Thank you,
/_urka


There is a tool here, which will list the enumeration info coming
from the plugged in USB device.

http://www.microsoft.com/whdc/device/stream/vidcap/UVCViewdwn.mspx

Did the instructions say to install any software before you plug
in the device ?

Paul
.



Relevant Pages

  • Re: PS2 keyboard port problem
    ... I knew about readerware, but never bought it. ... Both the USB and PS/2 ... I did try to detect new hardware ... detected unless it's plug and play....which the:cuecat isn't. ...
    (microsoft.public.windowsxp.basics)
  • Re: Re Photosmart 7660
    ... Thats normal for any USB device if you unplug and plug it back ... it says found new hardware. ... It SHOULD tell you when to plug it back into the USB port. ... > by those silly yellow bubbles from the taskbar! ...
    (microsoft.public.windowsxp.hardware)
  • Re: Unknown USB Device
    ... This seems to indicate that your USB ports may not be able to provide enough ... Are you connecting the drive to a HUB or a direct USB port on the PC? ... USB Device ... > Found New Hardware: ...
    (microsoft.public.windowsxp.hardware)
  • Re: USB in python
    ... Im trying to write a program for my USB device and I'm thinking of using ... Thanks for all the responses but I forgot to mention that I have very little hardware understanding and the device itself it very simple and only needs about 5V power to be active. ... The problem here is that I want to control when the device is active using a computer so I thought USB might be a good choice since its simple. ...
    (comp.lang.python)
  • Re: Simtec v Castle USB
    ... If said hardware fails to work, ... >> from when the first USB device classes and interface guidelines were ... > Who says that all USB devices follow the guidelines? ... > their products to work on Windows. ...
    (comp.sys.acorn.hardware)