Re: PCI Serial Card

Tech-Archive recommends: Fix windows errors by optimizing your registry

Check the port settings in device manager... the cash drawer is normally toggled by software manipulating the hardware flow control lines, so the cable is a factor as well... i.e. simple 3 conductor cables won't work.

I would recommend approaching it from the standpoint of setting the card to com2 which is a "standard" com port, then check the settings and assure that the irq is 3 (can't remember the port address)

Once there, with no comm app open, run hyperterminal and confirm that it can open the port (no conflicts)

Beverly Howard [MS MVP-Mobile Devices]
.

Relevant Pages

  • Re: Old Hardware: Timeout Problems?
    ... HP no longer supports or offers Win 98/98SE or ME drivers on their website due to issues regarding the use of some internal driver code which is Win 98 Microsoft code, which OEMs like HP are no longer allowed to publish and provide. ... If the drivers offer several port options, like USB, versus LPT, LPT1, or LPT2, you need to determine what the printer is attached to. ... These cables are fragile and may sometimes fail or the ends may get bent and not plug in correctly. ... The second area underneath that is the Timeout settings, ...
    (comp.periphs.printers)
  • Re: Cant Send e-mails - Outlook 2003
    ... Rich, the answer to #1 is yes, at home Outlook sends messages just fine. ... I asked them about other port numbers, and they say they do not have any ... Your original settings might have been okay, but Verizon may have had server ...
    (microsoft.public.outlook.installation)
  • Re: Desktop On-Call
    ... Also, if your port wasn't opened in a firewall, then I don't think you'd get the login prompt. ... I think the login Java applet does some initial communication with the DTOC server before it asks for your username and password. ... The notebook settings for this are found in the "Host PC Setting" tab. ...
    (comp.os.os2.apps)
  • Re: shared printer will not work?
    ... As for the printer port settings it is USB001 Virtual ... Right click the printer and select Sharing. ... To further set permissions click the Advanced button. ...
    (microsoft.public.windowsxp.general)
  • Programming serial interface question (linux)
    ... /* baudrate settings are defined in, ... /* save current serial port settings ... CREAD: enable receiving characters ...
    (comp.lang.c)