Re: I DISABLED MY ADAPTER, HELP!!

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I tried VGA mode and it starts up to the Windows Logo but then when that
screen changes it goes to a completely black screen.
any other suggestions???
--
Wendy Loo needs you!!!


"David Vair" wrote:

Instead of safe mode try using the last good configuration from the same start up menu from the F8.
Also you could try using the vga mode to start up with from the same menu if last good doesn't work.
--
Dave Vair
CNE, CNA, MCP, A+, N+

"Wendy Loo" <wlandry5@xxxxxx> wrote in message
news:4A5FA10C-DA77-41AA-8A23-48FCC7EB798F@xxxxxxxxxxxxxxxx
I HAVE TRIED THIS AND WHEN I SELECT SAFE MODE, I DON'T EVEN GET TO THE
WINDOWS LOGO, THE SCREEN READS INFORMATION THAT ENDS IN MUP.SYS AND FREEZES,
IT NEVER GOES PAST THIS LINE OF TEXT.
ANY OTHER IDEAS???
--
Wendy Loo needs you!!!


"Ron Martell" wrote:

Wendy Loo <wlandry5@xxxxxx> wrote:

I WENT TO CONTROL PANEL-DISPLAY-SETTINGS-ADVANCED-ADAPTER-PROPERTIES AND FOR
DEVICE USAGE I DROPPED DOWN TO DO NOT USE THIS DEVICE (DISABLE), WHEN I HIT
OK, MY COMPUTER RESTARTED, I CAN SEE IT GO THROUGH THE REGULAR BOOT UP
SCREENS, THEN THE WINDOWS LOGO, BUT AS SOON AS IT LOGS INTO MY PROFILE I HAVE
NOTHING BUT A BLACK SCREEN....HOW CAN I ENABLE THE DEVICE USAGE FOR MY
ADAPTER WITHOUT ACTUALLY BEING ABLE TO LOG INTO MY PROFILE???

I HAVE ALREADY TRIED STARTING UP IN SAFE MODE, BUT IT DOESN'T WORK EITHER,
HELP!!

Turn on the computer and start tapping the F8 key rapidly just as soon
as the first information of any kind shows on the screen. Keep
tapping until the Windows XP Startup Menu appears and choose Safe Mode
from the menu.

At the user logon screen choose the built-in Administrator account to
log into. When it has finished booting up run System Restore and
choose the most recent restore point that is prior to the time you
made the change.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."




.

Relevant Pages

  • Re: Speeding up slow XP PCs - suggested remedies when youve tried the obvious
    ... The symptom is very long boot times (about 1 minute each on the Windows logo ... and the Welcome screens, and a total of 5 minutes before clicking an icon on ... Try using SysInternal's Process Explorer, ...
    (uk.comp.misc)
  • Re: I DISABLED MY ADAPTER, HELP!!
    ... DEVICE USAGE I DROPPED DOWN TO DO NOT USE THIS DEVICE, ... SCREENS, THEN THE WINDOWS LOGO, BUT AS SOON AS IT LOGS INTO MY PROFILE I HAVE ... I HAVE ALREADY TRIED STARTING UP IN SAFE MODE, BUT IT DOESN'T WORK EITHER, ...
    (microsoft.public.windowsxp.hardware)
  • Re: I DISABLED MY ADAPTER, HELP!!
    ... Also you could try using the vga mode to start up with from the same menu if last good doesn't work. ... WINDOWS LOGO, THE SCREEN READS INFORMATION THAT ENDS IN MUP.SYS AND FREEZES, ... DEVICE USAGE I DROPPED DOWN TO DO NOT USE THIS DEVICE, ... SCREENS, THEN THE WINDOWS LOGO, BUT AS SOON AS IT LOGS INTO MY PROFILE I HAVE ...
    (microsoft.public.windowsxp.hardware)
  • Re: Many WM5 apps fail to implement a red hue.
    ... Newer HP screens are pretty ... apps on my new iPAQ rx1950. ... the little Windows logo in the U.L. corner. ... I'm reminded of that old Superman movie where Superman goes astray and ...
    (microsoft.public.pocketpc)