Re: unknown device USB root hub (2port) and no devices are attache

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

No luck! didn't work

"Ms S." wrote:

No errors are displayed. I will try the turn off/disable and see if that will
work.
I'll keep you posted
thx
Ms S.
"mikeyhsd" wrote:

reading the next post about usb problems eminded me of another change you can try.
under the POWER propeties of the ROOT HUBS, turn off/disable the turnoff to save popwer option.
i if it does nto help be sure and go back and turn that back on to conserve battery power if needed.



mikeyhsd@xxxxxxxxxxxx



"Ms S." <MsS@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:860DA46A-F449-48F8-897F-8D06EB6EEB65@xxxxxxxxxxxxxxxx

Well it worked only for a little while as you can see from the posting times
I tried it again and still no luck it continues to show the error message.

Ms S.

"Ms S." wrote:

Thank you
that fixed it.

"mikeyhsd" wrote:

one thing to try is to REMOVE the USB devices (Root Hubs) from device manager.
power down the computer, wait 3-5 minutes.
power it back up and allow it to find and install the usb devices.

"Ms S." <MsS@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:3554F8EC-1B4C-4A7D-BF1F-0787F3C3D20A@xxxxxxxxxxxxxxxx
When I power up my laptop I get a pop up on my task bar "USB DEVICE NOT
RECOGNIZED" and I can not stop it from popping up every second. When I double
click on the USB picture it states one of the USB devices attached to this
computer has malfunction and windows does not recognize it and when I check
the Device manager under drivers it has "no drivers are installed for this
device."
I do not have anything attached to the laptop just the power cord.
Everything else is attached on a docking station I have and I still get the
same error.

I followed a suggestion from a previous posting on 1/21/07 that Darwin
Tandiono replied and my laptop is extactly as he suggested so there was no
change for me to do.

Has anyone else had this problem or is currently experiencing this problem
HELP????

Ms S
.

Relevant Pages

  • Re: USB Devices... Not Installing
    ... Cari more then likely is correct. ... a power drain on the power supply. ... USB devices are capable of supporting up to 127 devices ... each time you want to move or install another device. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Dead computer (sometimes) with blinking light on motherboard.
    ... There is no mention in your parts list, of how many USB devices are ... motherboard, that selected +5V or +5VSB for that task. ... When I opened up my PC to reseat the main power connector, ...
    (alt.comp.hardware.pc-homebuilt)
  • RE: Is there a port or USB device limit?
    ... power being supplied on those ports, get a USB hub that has it's own power ... I don't know much about ports & ... USB devices, but i have a lot of 'stuff' connected externally. ...
    (microsoft.public.windowsxp.general)
  • Re: ehome infrared doesnt work after June media update
    ... Just a shot in the dark, but I shut down and shuffled the plugs on my USB devices. ... will have to wait until the next sleep cycle to see if any of this had an ... doing a cold power down and then power up? ... management to Highest performance, but then it rarely ever sleeps. ...
    (microsoft.public.windows.mediacenter)
  • Re: USB Selective suspend support by Vista?
    ... this device to save power" on it's Power Management tab. ... In Microsoft Windows XP and later operating systems, ... stack supports a modified version of the "selective suspend" feature ... Selective suspension of USB devices is especially useful in ...
    (microsoft.public.development.device.drivers)