Re: Viewsonic Monitor Weird

Tech-Archive recommends: Fix windows errors by optimizing your registry

Try using the device manager to detect new hardware, i.e.
the monitor? Why isn't it connected when you boot the
computer?



"Kenw" <kenw@xxxxxxxxxxx> wrote in message
news:mg46p2l2tsonedv56kkv035l6h442g0f82@xxxxxxxxxx
| Here is what I am running
| 2 Computers, XPpro/sp2 , NEC lcd, ATI 9600xt and KVM
switch. I updated
| my monitor to a Viewsonic VX2035wm 20" lcd. No problems
with the NEC.
|
| My second machine is not connected to the monitor when it
boots, so
| the monitor is not seen and comes up as default monitor. I
changed the
| default to see the Viewsonic, but the resolution is wacked
out.
| I think the other computer may have the same problem, but
don't want
| to go there yet !!
|
| Went through to whole monitor and ATI driver setup a few
times.
| Did a repair reinstall of XP.
| I do have the icm file in win\sys32\spool\color.
| But I haven't found the .inf or .pnf files.[don't know if
I really
| need them] since the .icm file is where it should be.
|
| I emailed Viewsonic since I beleive it is their driver
that is bad
| since the NEC worked fine.
|
| Anyone have a idea ?
|
| Thanks
|
|
| KenW


.

Relevant Pages

  • Re: ANNEX Terminal Concentrator
    ... When I go into the monitor, ... REV ROM: Maj Rev 99 Min Rev 0 ... > I wish to use it as a terminal concentrator for some Sun Boxes. ... > Where I work have a couple of these that are able to boot from themselves. ...
    (comp.sys.sun.hardware)
  • Re: How can Linux demage a motherboard?
    ... it a very low temperature as the alarm point, ... Have you tried to boot to single user? ... If the configuration is not being written to the monitor chip ...
    (comp.os.linux.hardware)
  • Re: F9 install : cant get X to work
    ... comes from the monitor). ... from behind the KVM switch. ... then refuses ssh and scp from the rest of the LAN. ... Nor have I yet managed to get it to boot from its own hard ...
    (Fedora)
  • Re: Dead G5 Help
    ... We then took the machine (without the monitor, which is powered by the G5) to a local repair shop. ... Wouldn't boot. ... He swapped RAM, video card from his G5, no luck, dead. ... I'd try a "proven cable" on BOTH ports (I'm assuming the video card has both VGA and digital connections). ...
    (comp.sys.mac.system)
  • Re: PC Problem on boot up
    ... monitor stays blank except a small cursor in the upper left. ... has not successfully gone through the boot routine. ... from the motherboard, the power supply or somewhere else. ... Hardware failures just happen. ...
    (comp.os.linux.setup)