Re: New Computer

Carl G wrote:

Hi Guys and Gals
Just built myself a new pc , and have a problem.
Here is what i built.
Asus Motherboard=P5LD2 Deluxe
PCI Express Video Card = ATI Express X1300 Pro , 256MGB
CPU = Pentium D = 3.2GHZ , 800mhz fsb , 2x2 mb L2 cache
Memory = 2 gig , PC2 5300 (DDR2)

When i boot the pc all seams to work acording to the led lites, but no
monitor.
PC does not turn on the monitor , I know the monitor works , i
unhooked it and put it back on my other pc and it fired right up.
Is this a video card problem or could it be motherboard , or something
else? When i started it the first time i heard some beeps but didn't
catch how many or anything.
On reboots there are no beeps at all.
Just looking on advise where to start looking.
Thanks


Got a good power supply in there? Does that video card require a
separate connection to the power supply? If yes, did you remember to
connect it?

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
.

Relevant Pages

  • Re: System failure, no video, strange beeps
    ... the HDD spin up) but there is nothing on the monitor. ... There are no beeps from the speaker ... The lack of any output to the monitor makes me think the video card ... of beep codes for this board, but this doesn't sound typical of any ...
    (alt.comp.periphs.mainboard.asus)
  • System failure, no video, strange beeps
    ... the HDD spin up) but there is nothing on the monitor. ... There are no beeps from the speaker ... The lack of any output to the monitor makes me think the video card ... of beep codes for this board, but this doesn't sound typical of any ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Quick question about computer post beeps
    ... >>> yanking on the monitor plug instead of unscrewing it,, and now all ... >>> i'm getting is a blank screen and then the computer beeps,,,,first ... >>> I feel that the motherboard is toast due to her yanking on the ... >> You don't mention if the VGA connector is on a video card or on the ...
    (microsoft.public.windowsxp.general)
  • Re: monitor/pc connection
    ... You could swap out the video card, if that's what you have, or borrow a card ... and turn off the built in. ... The monitor is blank (flashing amber power light). ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: BIOS cannot boot
    ... I got about 4 beeps at startup. ... the video card should be seated properly because the system was able ... >> Therefore, the monitor is working. ... >>> analysis of the beeps would depend on the motherboard make as different ...
    (microsoft.public.windowsxp.general)