Re: New motherboard?
Hi,
......shutting down every 30 minutes....... i was wondering if this is a
symptom of a broken motherboard,.....
Have a look at all your fans and make sure they're clean and running,
including the one in your power supply. Heat from the clogged cooling
fins on your CPU can also cause your shutdown troubles.
---==X={}=X==---
Jim Self
AVIATION ANIMATION, the internet's largest depository.
http://avanimation.avsupport.com
Your only internet source for spiral staircase plans.
http://jself.com/stair/Stair.htm
Experimental Aircraft Association #140897
EAA Technical Counselor #4562
.
Relevant Pages
- Re: Laptop slow when CPU temperature approaches 75
... transfer components that have come loose or plugged up radiators. ... (Most laptops have a few of these that the fans will blow through. ... heat pipes are used to move the heat away from ... You can clean them by blowing ...
(alt.sys.pc-clone.dell) - Re: How to PostMortem?
... It is convenient to verify fans. ... Heat tends to make a defective component more ... wire pushed into back of receptacle. ... Surge protectors and UPSes are mostly promoted by urban ...
(comp.os.linux.setup) - Re: He Was Onto Something.
... > to trade Shaquille O'Neal. ... > more noise in playoffs than the Lakers, ... the Heat will be paying him around 8.5 million per until 2011. ... > light of what Laker fans knew good and well when they traded him off. ...
(alt.sports.basketball.nba.la-lakers) - Re: Turn off laser printer with power strip?
... I have repaired laser printers, and indeed, even with "designed" heat removal via fans and heatsinks, parts do overheat and permanently warp. ... I do not know of any laser printer manufacturer that suggests regularly turning off the printer after an activity before the unit's cooling fans go off. ... Power bar switches are 3rd party products and switching a peripheral off in that manner is equivalent to yanking the plug on it, ... why do the engineers design there to be cooling fans running on these devices if they want you to turn them off at will? ...
(comp.periphs.printers) - Re: Major problems
... I guess 30 seconds with a multimeter will tell you that you have to blow out the detritus from the heat sink fins. ... He also said fans are working. ... Otherwise shotgunners could not do their thing. ...
(microsoft.public.windows.vista.general) |
|
