Re: SATA Errors
- From: "George Valkov" <a@xxxxx>
- Date: Mon, 13 Nov 2006 18:50:03 +0200
"DL" wrote:
| If you mean a third party driver was used to enable biglba then I'm not
| surprised.
Yes, indeed! I think it was for the SATA controller built-in the main board.
| But if you mean a set of hd's in a working array was installed on a new
raid
| controller then it depends on the controller whether it can be done
without
| a clean installation and rebuild
No, it was a new computer bought in December 2004. Three days later, Windows
XP died when I changed this configuration parameter:
System Properties, Advanced tab, Performance, Settings button, Advanced tab:
Memory usage = System cance
On the next logon after restart, Windows XP displayed many "Delayed write
failed" errors and then died. The two partitions that were on the SATA
hard-disk were destroyed.
Strange why this parameter caused Windows to destroy the partitions?
|
| "George Valkov" <a@xxxxx> wrote in message
| news:ONccj8xBHHA.4024@xxxxxxxxxxxxxxxxxxxxxxx
| > A friend of mine had a lot of head ache with this problem and lost a lot
| of
| > data:
| > Driver required to access 200 GB SATA disk`s sectors beyond 128 GB
border.
| > Guess what happend when something got wrong with the driver ;-) About 63
| GB
| > of sectors were instantly marked as BAD.
| >
| >
| > "DL" wrote:
| > | Does your mobo manual state that a sata/raid driver must be installed
| from
| > | floppy via F6 during an installation/repair.
| > | Does it require any specific raid bios setting when using a single
| drive,
| > eg
| > | as 'jbod'
| > | What is the motherboard?
| > |
| > | "S Murder" <SMurder@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
| > | news:0E992DF5-8D6F-417E-9D82-6ABF38A47020@xxxxxxxxxxxxxxxx
| > | > When formatting through Disk Management, the format completes, but
| when
| > I
| > | > view the drive there's no System Volume Information or Recycler, and
| > when
| > | I
| > | > try to add a new folder, I get an error saying
| > | > "Unable to create folder New Folder
| > | > The System cannot find the file specified"
| > | > and when I try to add a new file, either nothing happens or I get an
| > | error.
| > | >
| > | > It's SATA II and my MB is only SATA 1, so I configured the jumper
for
| > SATA
| > | 1
| > | > mode. This has made no difference however.
| > | >
| > | > "DL" wrote:
| > | >
| > | > > Are you saying you could not Partition/format via Disk Management?
| > | > > If this is your only sata drive you might want to check your mobo
| > manual
| > | for
| > | > > specific instructions for installing a sata drive, as they can
vary.
| > | > > I'm assuming the sata drive is compatible with the version of sata
| > your
| > | mobo
| > | > > supports, ie they are both sata1 or sata2
| > | > >
| > | > > "S Murder" <SMurder@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
| > | > > news:716A28E7-97DC-4DC8-B8B8-845E91C902DD@xxxxxxxxxxxxxxxx
| > | > > > I tried it again though and it completed, showing no problems.
| > | > > >
| > | > > > I ended up reformatting again, and I've realized that the only
| > | successful
| > | > > > format (I was able to copy some files, but got the error after a
| few
| > | > > minutes)
| > | > > > has been with the Windows Installation Disk. Using the Disk is
| also
| > | the
| > | > > only
| > | > > > time the System Volume Information and Recycler appeared.
| > | > > >
| > | > > > "DL" wrote:
| > | > > >
| > | > > > > If the test utility failed to complete then you certainly have
a
| > hw
| > | > > problem.
| > | > > > > Whether its the hd or mobo.......?
| > | > > > >
| > | > > > > "S Murder" <SMurder@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
| > | > > > > news:390693D7-5345-4444-A4CB-D076392C1D6F@xxxxxxxxxxxxxxxx
| > | > > > > > When i restart it's there again.
| > | > > > > > Nope, not loose. I was haing disk errors before, so I think
| it's
| > | > > related.
| > | > > > > > I downloaded the utility, and it spent 40 minutes running a
5
| > | minute
| > | > > test,
| > | > > > > > without completing (I had to abort).
| > | > > > > >
| > | > > > > > "DL" wrote:
| > | > > > > >
| > | > > > > > > It appears in the bios?
| > | > > > > > > The connections havent come loose?
| > | > > > > > > Your sata hd site will have a test utility
| > | > > > > > >
| > | > > > > > > "S Murder" <SMurder@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
| > message
| > | > > > > > > news:1DFD0D54-A3C3-4483-9D87-A1B0881CA4E9@xxxxxxxxxxxxxxxx
| > | > > > > > > >
| > | > > > > > >
| > | > > > >
| > | > >
| > |
| >
|
http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windowsxp.hardware&mid=ab18e46f-2669-4819-8492-ed567fd4c18e
| > | > > > > > > >
| > | > > > > > > > I tried copying some files to my new SATA HDD, but after
a
| > few
| > | > > minutes
| > | > > > > I
| > | > > > > > > got
| > | > > > > > > > an error saying "Delayed Write Failed", and now the SATA
| HDD
| > | > > doesn't
| > | > > > > > > appear
| > | > > > > > > > in My Computer or Disk Management any more. Is there any
| way
| > | to
| > | > > get my
| > | > > > > > > hard
| > | > > > > > > > drive to work for good?
| > | > > > > > >
| > | > > > > > >
| > | > > > > > >
| > | > > > >
| > | > > > >
| > | > > > >
| > | > >
| > | > >
| > | > >
| > |
| > |
| > |
| >
| >
|
|
.
- Follow-Ups:
- Re: SATA Errors
- From: DL
- Re: SATA Errors
- References:
- Re: SATA Errors
- From: DL
- Re: SATA Errors
- From: DL
- Re: SATA Errors
- From: DL
- Re: SATA Errors
- From: S Murder
- Re: SATA Errors
- From: DL
- Re: SATA Errors
- From: George Valkov
- Re: SATA Errors
- From: DL
- Re: SATA Errors
- Prev by Date: Re: disable memory area at boot time
- Next by Date: Re: SATA Errors
- Previous by thread: Re: SATA Errors
- Next by thread: Re: SATA Errors
- Index(es):
Relevant Pages
|
