Re: install additional DVD writer

Tech-Archive recommends: Fix windows errors by optimizing your registry

Each IDE channel can have a master and a slave device, just make sure to set
the jumpers on the drives correctly.

"mistral" <mistral@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:es$rs0f7GHA.4996@xxxxxxxxxxxxxxxxxxxxxxx
I want install additional DVD writer. Motherboard is P4i45GV ASRock. Not
clear, can the second DVD to be installed without various problems: since
primary IDE Connector and secondary IDE Connector are already used by
hardrive and CD-ROM.

m.


.

Relevant Pages

  • Re: Problem booting FC5 after good install and doing the "first boot" configuration
    ... On any drive on an IDE chain I make sure that jumpers are used to ... configure the master and slave device. ... Move the optical drive to the secondary IDE channel. ... There is only one IDE connector on the mother board. ...
    (Fedora)
  • Re: Compact flash + IDE/CF adaptor + 486 ->problem
    ... The are two jumpers. ... First selects master/slave. ... I have checked both the adapter and the 128 Mb CF in my Pentium IV ... You should - if not needed otherwise - only include the IDE support. ...
    (comp.os.linux.embedded)
  • Re: 9.04 cant find second hard drive.
    ... the old drive is IDE ... the jumpers are set for slave on the IDE harddrive ... system between upgrading to a SATA drive and 9.04, ... I'm not convince it's a BIOS problem, has anyone thought the drive might ...
    (Ubuntu)
  • Re: Slave drive
    ... No jumpers is the slave setting, so do I just remove jumper pins and leave ... > Your DVD drive is most probably connected to the secondary IDE channel. ...
    (microsoft.public.windowsxp.general)
  • Re: Probleme mit DVD-Laufwerke
    ... PRIMARY IDE connector ... DVD ROM Laufwerk als Master ... IDE Connector: ... Bei Jumper "Slave" wird das Laufwerk gar nicht erkannt! ...
    (microsoft.public.de.german.windowsxp.hardware)