Re: Computer fails to startup



antioch wrote:
It would appear to be more of a software problem then hardware.

I doubt that. If it were a software problem I think I would have to be
able to boot from the Windows CD, but I can't. Also I guess I would
have to be able to enter the bios setup, because this has nothing to do
with the installed OS, but I can't either.

So I'm pretty sure it is a hardware problem... I wish it were a
software problem, then I could just re-install the Windows. But now,
not being able to boot from hard disk or CD, I don't know where to
start.

But I'll post it in the groups you suggested as well, perhaps someone
there will be able to help my out.

.



Relevant Pages

  • Re: XP Key
    ... "Grey" wrote in message ... > I'm trying to activate windows XP on a computer, ... > Had a software problem, formatted, reinstalled XP, ... activation over the internet is not successful, or you are not connected to ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Latitude X300 CD Problem
    ... > to eliminate this being a software problem, ... > the boot sequence to boot first from the cd, ... > windows. ... >> JohnS ...
    (alt.sys.pc-clone.dell)
  • Re: Latitude X300 CD Problem
    ... to eliminate this being a software problem, enter the bios and change the ... boot sequence to boot first from the cd, then the hard disk. ... bootable cd (windows recovery cd that came with your system for instance) ...
    (alt.sys.pc-clone.dell)
  • Re: XP Home COMPLETELY Frozen
    ... Sounds like a software problem, or a Temp / Temp Internet file that's jammed ... > issue and that I need to format and re-install windows. ... > Celeron is the problem. ...
    (microsoft.public.windowsxp.general)
  • Re: Grayed vertical panel in display
    ... When I boot into Bios, yes, the vertical gray panel is still there. ... looks like a hardware issue with either the display or the graphics adapter. ... be a software problem in Windows - as you are not running Windows, ...
    (microsoft.public.windowsxp.perform_maintain)