How can I determine if my USB ports are 2.0 or 1.1 ??? The reason is I
want
to purchase a USB Flash Drive and I've been reading on the SanDisk web
site
that their latest models require 2.0 for optimum speed transfers.
Re: pc activity stop ... If these are USB devices,...Open Control Panel, open ... System, go to the Hardware tab, click Device Manager, click the plus sign ... (microsoft.public.windowsxp.accessibility)
Re: Mouse freezing up after not being touched for a while ... It appears to freeze when I have left the computer idle for ... In the Device Manager, set the USB devices so they can't be turned off to save power. ... then to wake your computer you will need to use the keyboard or hit the power button. ... (microsoft.public.windowsxp.general)
Re: How Can I Tell If My Media Center PC Has Reciver Built In ... 2.Select the Hardware tab> Device Manager.... 3.Select the plus sign next to Universal Serial Bus Controllers.... 6.Disconnect all other USB devices, leave the TV tuner plugged in, and then ... (microsoft.public.windows.mediacenter)
Re: Windows XP USB Drivers ... You can tell if you have USB2 drivers install by using the device manager,... >>I had a PCI card just installed with 4 USB Ports, but was told it was only ... (microsoft.public.windowsxp.general)
Re: USB Hub ... >>>have many too many USB devices vying for access to this laptop. ... > 2) Cable length from hub to PC connector (prolly less of an issue with ... bought a USB2,... but I do get flashed warnings about USB2 devices in my USB1 hub and ... (uk.rec.motorcycles)
