Re: setting up a new hard drive as drive D

"Walter" <Walter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:87145E99-CE92-4D32-8F8E-A28141F3DBBB@xxxxxxxxxxxxxxxx
Hi,
I have a pc which has Windows XP Home (OEM) which has been updated to
SP2
plus all the other updates.
This has Windows setup plus the applications on drive C.
I want to add a second hard disk as IDE drive D but I cannot see any
were
that will enable me to fdisk prior to formating the new drive.
Can any one advise me where to find the commands to do this?
Thank you,
Walter


"namniar" <this@that> wrote in message
news:%23758C0HQFHA.1268@xxxxxxxxxxxxxxxxxxxxxxx
Rt click My Computer, Manage then select Storage, Disk Management
branch.


"Anna" wrote:
Walter:
You ordinarily do not use the DOS FDISK/FORMAT commands to partition &
format a hard disk in the XP environment. Rather, as namniar has
indicated,
you use XP's Disk Management utility to do so.

Here are the detailed steps...
1. You will partition & format your second HD using XP's Disk Management
utility. Access it by right-clicking My Computer > Manage > Computer
Management > Disk Management, or, Start > Run > enter diskmgmt.msc &
click
OK.

2. If the disk you're adding is a "virgin" drive, i.e.,
unpartitioned/unformatted, XP will detect the new disk and automatically
open the "Initialize and Convert Disk Wizard". Follow the prompts to
initialize the disk. (Do *not* select the option to convert your hard
drive
to a "dynamic disk", nor the "convert" option).

3. If Disk Management does not detect the new disk, click "Rescan Disks".
You might need to restart your computer although this is usually
unnecessary.

4. Disk Management will show the capacity of the new drive as
"Unallocated"
space. So in order to use the new drive you will have to partition and
format it.

5. Create a partition by right-clicking on the pane that displays the new
drive (diagonal lines will appear in the pane), and select "New
Partition".
The "New Partition Wizard" dialog box will open. Click Next.

6. Select the option "Primary partition" (the default) as the "Partition
Type". Click Next.

7. The "Specify Partition Size" dialog box will indicate the maximum disk
capacity in MB. If you want to create multiple partitions, enter whatever
partition size (in MB) that you want for the first partition and click
Next.

8. In the next dialog box, assign a drive letter for this disk and click
Next.

9. The "Format Partition" dialog box will open. Review it carefully and
accept the defaults or make any changes. If you're reasonably certain
your
hard disk is sound, you can tick the "Perform a quick format" checkbox.
Click Next

10. Confirm the settings in the "Completing the New Partition Wizard"
dialog
box and click Finish.

11. The "Computer Management" window will open indicating the disk is
being
formatted (progress shown as % formatted).

12. Your hard disk has been initialized, partitioned, and formatted. If
you're creating multiple partitions on that disk, you'll have remaining
"Unallocated" disk space that you can partition & format, so repeat the
process starting from step 5. above.

Anna


"FrankL123" <FrankL123@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6906571F-C458-41C1-9CBB-4F380A932841@xxxxxxxxxxxxxxxx
Thanks Anna - seems quite straighforward (just what I want to do)
except....
on your point 5 " Create a partition by right-clicking on the pane that
displays the new
drive (diagonal lines will appear in the pane), and select "New
Partition".
The "New Partition Wizard" dialog box will open. Click Next." ....
the "New Partition" is grayed out, and not accessible!!


Frank:
There can be a variety of reasons for this...

1. The HD may be defective. Unless you're absolutely certain the drive is
non-defective it would be wise to download the diagnostic utility from the
website of the manufacturer of your HD and check it out. The fact that the
drive is brand-new is no guarantee that it's non-defective. Similarly, it's
possible for a defective HD to be listed in My Computer and Device Manager.
2. Assuming the drive is non-defective - ensure that the drive has been
properly configured (jumpered) and securely connected. Re:check the IDE
ribbon cable (I'm assuming this is a PATA HD) to ensure that it's properly
seated on the HD and the motherboard's IDE connector as well as the power
plug connection.
3. The IDE (or SATA) data cable may be defective.
4. Assuming all seems secure and properly configured - shut down the machine
& disconnect the secondary HD and boot only with your system drive
connected. Assuming the boot goes without incident, shut down the machine
and re:connect your secondary HD. Again, make absolutely certain you've
properly jumpered/connected that drive. Access DM again and determine if the
problem has been corrected.
5. If still no-go, move the problem HD to another IDE (or SATA) connector.
For example, if you have it currently connected as Primary Slave, connect it
as a Secondary Master or Slave, whatever is available. Don't forget to
change jumper positions if necessary.

We have come across some rare instances where a non-defective, properly
configured & connected HD for unexplained reasons could not be formatted
within the XP operating system. (At least we couldn't account for the
existence of the problem). In virtually every case that I recall (and
understand this was a rare event to begin with) the problem occurred when we
were attempting to install the XP OS on a "virgin" HD. I'm hard-pressed to
recall (in my own experience) a similar incident involving the same problem
occurring when trying to partition/format a non-defective & properly
configured secondary HD using the Disk Management utility, but I have seen
reports of this.

In the case of the problem we encountered involving the installation of the
XP OS on a new HD, we found that in nearly every case if we re:installed the
OS (sometimes up to three times), it would "catch" and we encountered no
further problems. In the very few instances where even that didn't work, we
finally had to resort partitioning/formatting the drive using the FDISK &
FORMAT commands (from a DOS boot disk, e.g., Win9x/Me Startup floppy disk).

Hopefully, you won't have to do this.
Anna


.

Relevant Pages

  • Re: Panasonic HD Recorders - What disk format?
    ... The earlier part of this is more about what may be Linux partitioning, ... might be possible to present the recorder with a larger disk already ... Most DOS/Windows utilities such as FDisk, Ghost, and Partition Magic Pro ... prompts to format it. ...
    (alt.os.linux)
  • Re: Cant find Hard disk
    ... Computer> Manage> Computer Management> Disk Management. ... Now you must partition and format your new drive. ...
    (microsoft.public.windowsxp.hardware)
  • Re: How do I label a disk?
    ... now I am going to definitely install solaris but I have this ... > to a dead disk. ... I tried to label it with the format command: ... format> partition ...
    (comp.unix.solaris)
  • Re: Invalid media Type
    ... D is a 200gig, one partition, data drive. ... Left a program copying data ... This morning it said disk full, ... Fdisk doesn't, but Format certainly does. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Linux community software-update-anarchy polemic
    ... Remember, I'm just a monkey. ... That implies that if you have one disk per partition, ... Trust the kernel or don't trust the kernel, but either way, both ...
    (comp.os.linux.misc)