Re: Only one core working
- From: "cyber10" <cyber10@xxxxxxxxxxx>
- Date: 23 Jun 2006 08:13:30 -0700
you should activate hyperthreading in BIOS ( I´m using a D805 with no
HT but this is the only way I found to use both internals CPUs)
Jaymon ha escrito:
Mick,
Try this, click Start, Run, then type "msconfig" in the run box, click "OK",
select the boot.ini tab, advanced options, check the box /NUMPROC= and set =
2, click "OK" and "OK" again to reboot/restart the computer, any change..?
j;-j
"Mick" wrote:
No Joy. Task manager only has one chart showing. Option to show one chart
per CPU is greyed out
Bios shows two cores
Device manager shows two processors (working correctly??)
Intel ID shows one processor (one core)
Sisoft Sandra shows one processor (one core)
Premier 2 shows one processor
IS it motheroard or processor fault ??
"Andrew E." <eckrichco@xxxxxxx> wrote in message
news:FD2A5B21-682D-4EAA-91B5-652062B23949@xxxxxxxxxxxxxxxx
Have you installed the chipset installation utility."Deleted from from
device
mgr" ,you dont delete,you can uninstall or disable,but delete doesnt get
you
anywhere...Also,try downloading the hyperthreading chk utility from
intel,thiers
also,processor identification utility,between the two you should get some
acurate results.
"Mick" wrote:
Have Asus P5VD1-X
Win xp Pro SP2 P805 Dual Core
7600GT
2x 512 MB PC 3200
Have lost Dual Core capablity, Used to see two graphs in task manager but
now only one.
Have updated ASUS Bios to latest 507 , all xp updates.
Bios sees two cores on startup.
2 processors seen in Device manager, which state they are working
correctly.
Device shows ACPI multi processor.
Yet only one chart appears on Task Manager graph, function to see one
chart
per CPU greyed out, and Premiere 2 only sees one processor.
have done full clean install of XP, deleted processors from device
manager
and
redetected, no joy. only one still showing on task manager.
Sisoft sandra and CPUID and intell ID show no errors so where has my 2nd
core gone.
If i enable hyperthreading in bios( i know its not a hyperthread proc).
Xp
Task manager shows two graph charts and premiere shows multi processor
but
it crashes.
help.
Mick
.
- References:
- Only one core working
- From: Mick
- Re: Only one core working
- From: Mick
- Re: Only one core working
- From: Jaymon
- Only one core working
- Prev by Date: Re: motherboad chipset drivers
- Next by Date: Re: motherboad chipset drivers
- Previous by thread: Re: Only one core working
- Next by thread: Disc read error problem after installing windows xp
- Index(es):
Relevant Pages
|
