Re: 250G Hard Disk showing up as 137G
- From: "Jon_Hildrum" <Jon_Hildrum@xxxxxxxx>
- Date: Fri, 9 Jun 2006 16:25:35 -0700
I understand. It may not work anyway since it appears to be a system volume.
What you have may very likely be a result of the cloning accomplished by
your friend. The cloning software may only have been able to handle 137GB.
Thus, your option for having one partition (one drive letter) for the whole
drive becomes something like partition magic. There are several others like
Partion Manager, Ranish partion manager or bootitng.
--
Jon Hildrum
DTS MVP
Jon_Hildrum@xxxxxxx
www.hildrum.com
"Pank" <Pank@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C6ACA275-A39B-46B1-A216-5652239F4278@xxxxxxxxxxxxxxxx
Randy,
In response to your valuable help, I have the following answers:-
A friend of my copied the original old hard drive (40GB) which have SP2
and
all my applications to the new 250GB drive. I was advised that he used
some
sort of cloning product (not Norton as he doesn't like it!!).
Secondly, I personally haven't updated the BIOS; whether my friend did as
part of the disk replacement I am unsure.
How can I ascertain what the BIOS version number is or whether it is what
just what came with the PC? If I undertake a BIOS update, would I see the
whole 250GB? If Yes, then can you point me in the direction of how to do
it
and the pitfalls. My PC is a Microstar and I don't think they even make
them
anymore.
Jon,
I did not want another partition and hence have not even pursued that line
of thinking.
Having read the article you mentioned it referees to Dynamic Disks and
hardware RAID 5 container!!. Not being that clued up on these items, I am
loathed to go down this avenue.
Seeing as the World Cup has started and it is the weekend I am off to the
pub to start celebrating the weekend. I will have a drink for you guys who
have helped so far.
Thank you and Regards
"Jon_Hildrum" wrote:
You have disk which is 233GB (250GB).
You have one partition which is 137.13GB
The rest of the disk is not allocated. Thus you could use disk manager to
create another partition in the unallocated space on this disk (would
become
another drive letter after partitioning and formatting)
(My approach and the safer approach in my view)
You could also extend the existing partition into the unallocated space.
This is easier done with third party software such as partitionmagic.
However, please look at this article for how to using winXP tools:
http://support.microsoft.com/kb/325590/en-us
If you plan on trying to extend the existing partition please bback up
all
important data prior to starting
--
Jon Hildrum
DTS MVP
Jon_Hildrum@xxxxxxx
www.hildrum.com
"Pank" <Pank@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5EADB42D-AA98-4533-BA87-EB9CB333C110@xxxxxxxxxxxxxxxx
Jon,
Firstly, thanks for participation.
Disk Management says the following:-
Volume C
Layout Partition
Type Basic
File System NFTS
Capacity 137.13GB
Free Space 105GB
After the above information, it details the following:-
Disk 0, Basic. 233.76GB, Online
Please note I have another disk which is over the 137 threshold (Drive
D)
which is NFTS but that shows the full allocation as 300GB.
One last bit of information that may be crucial is that the OS is XP
Home
edition.
Regards
"Jon_Hildrum" wrote:
He means go to disk management and see what it says about the drive.
Here is how:
Use Start ---Settings ---> Control panel.
Select Administrative tools applet then computer management.
Then select Disk management.
It should show you the drive(s), how it is partitioned and what
portions
is
used.
It is possible that the whole drive is shown there but only a portion
of
it
is allocated.
--
Jon Hildrum
DTS MVP
Jon_Hildrum@xxxxxxx
www.hildrum.com
"Pank" <Pank@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:26E0ED97-33C9-443E-9C04-A0834B89B6D6@xxxxxxxxxxxxxxxx
DL,
Sorry to sound thick, but can you expand a bit, what do you mean by
disk
management? Do you mean whether it is FAT32 or NTFS?
"DL" wrote:
What is seen in Disk Management?
"Pank" <Pank@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:73A0D1B4-FE84-4464-A061-46B45953F912@xxxxxxxxxxxxxxxx
I have undertaken a search on this forum as to what I need to dome
to
enable
to see the full space allocation of a 250G Maxtor disk.All
The C drive currently shows as 137G when I go to My Computer. The
machine
had SP2 on it when the old C drive (80G) was replaced with this
new
one.
the s/w (including OS) was copied from the 80G to the 250G.visible
I followed the instructions as indicated on one of the questions
and
installed MaxBlaster which puts in 48 bit LBA support. I was
hoping
that
this would show the full disk allocation, but ALAS no such joy.
I have also read one of the Microsoft knowledge Base document
(KB)
303013
and it gives instructions on how to enable 48-bit LBA support.
The KB document mentions looking for the version number for
ATAPI.SYS,
and
that it should be 5.1.2600.1135, my version number is
5.1.2600.abcd
(where
abcd is greater than 1135, {I cannot remember the exact version
number}).
When I go into the PC setup (F1), then the following information
is
under the CMOS for the primary IDE capacity 251G.allocation.
I am therefore puzzled as to why the full space allocation is not
visible.
I am sure I am missing something, and would therefore be grateful
for
any
assistance anyone can offer to allow me to see and use the full
Regards
.
- References:
- Re: 250G Hard Disk showing up as 137G
- From: DL
- Re: 250G Hard Disk showing up as 137G
- From: Jon_Hildrum
- Re: 250G Hard Disk showing up as 137G
- From: Pank
- Re: 250G Hard Disk showing up as 137G
- From: Jon_Hildrum
- Re: 250G Hard Disk showing up as 137G
- From: Pank
- Re: 250G Hard Disk showing up as 137G
- Prev by Date: Re: Problem with Sleep Key on Wireless Natural Multimedia Keyboard.
- Next by Date: Re: Unable to access USB drive
- Previous by thread: Re: 250G Hard Disk showing up as 137G
- Next by thread: Re: 250G Hard Disk showing up as 137G
- Index(es):
Relevant Pages
|
