Re: Xp and RAID from Adaptec problem
Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance
"Ivan" <Ivan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:12B1DEB3-F92A-4953-84EE-583A12F78B51@xxxxxxxxxxxxxxxx
I have a motherboard from Intel, I installed PCI controler SATA
RAID from
Adaptec (1210SA), I set up RAID 1. Reboot to boot from
installation CD
XPSP1 Pro, F6 to install RAID driver, select newest drivers from
Adaptec and
get Error message "File aaa....sys unexpected error 4096 @line
2108 in
d:\xpsp1\base\boot\setup\oemdisk.c."
Any suggestions?
Thanks.
Ivan
Check the boot order in the BIOS. There are two places for this.
.
Relevant Pages
- Sol10 X86 and Adaptec RAID card
... I installed an Adaptec 2230SLP Raid card in a Sol10 ... I was able to create a Raid drive with on the board bios. ... On boot up the RAID controller reports that the RAID ...
(comp.unix.solaris) - Re: Problems with software RAID on SATA
... Connected to this are two 320GB drives ... >>which I want to turn into a RAID1 array. ... >>I'm almost certain it's a problem with initting the RAID arrays at boot. ...
(Debian-User) - Re: Paul and Old Man: Cannot fix RAID5 failure ...
... I removed the drive reported in error, no boot or rebuild. ... I tried Universal Boot Disc but it won't load the RAID driver ... I was considering a parallel WinXP installation on a 4th disk, ... Maybe like in my case, actually 2 drives failed, while the RAID bios ROM ...
(alt.comp.periphs.mainboard.asus) - Re: [SLE] please!! help me, completly lost!
... >machine which was equipped with hard drives configured as RAID.. ... or else to boot from a floppy. ... This is due to a bug in grub. ... Once booted you can switch to grub and setup the MBR on both drives. ...
(SuSE) - problem with ldconfig
... Well, after I had reloaded my raid, ... I used to either hit F1 (to boot the ... Well, the other thing that's come up, I can't get my nvidia driver to work ... Version: GnuPG v2.0.4 (FreeBSD) ...
(freebsd-hackers) |
|
