Re: DVD Drive.
- From: "Bob Hamel" <bobber128@xxxxxxxxxxx>
- Date: Wed, 19 Apr 2006 06:59:16 -0400
I am Having the same problem's . I have a leadtek PVR 2000, and a Plextore
760 A DVD Burner . And sometimes it will burn in DL and sometimes it will
not.
I am running
windows XP Home SP 2
1 Plextor DVD-RW 760-A
1 PLEXTOR CDRW
2- 512 CRUCIAL MEMORY
ASUS A8N-SLI MOTHERBOARD
4-WD'S 80 GIG 0-1 RAID CONFIG.
1 LEADTEK PVR 2000
2 MSI NX6600 GT'S
1-AMD 2.2 GIG SLOT 939
Sometimes it will burn sometimes it wont.
Sometimes it will finalize, sometimes it wont. sometimes leadtek works good
and burns direct to plextor sometimes it wont, sometimes easy media creator
8 will work sometimes it wont.
Did the bios thing from plextor, also dumped driver's for plextor, and
motherboard, reinstalled emc8, same with pvr2000. And I am using the correct
media, also switched burning speed's.
I am baffled , also have plenty of room on hard drives to burn movies, and
plenty of memory.
"Peter" <Peter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:701C0299-9E19-4F25-921E-70FF526872F8@xxxxxxxxxxxxxxxx
What is the brand and model of your DVD R/W drive?
It seemed that it does not support DVD-R disk but it is a very rare case
as
most of the present DVD R/W drives support multi format of various DVD
disks.
Try update the firmware of your DVD R/W drive.
--
Peter
"Andy W" wrote:
"Peter" wrote:
Have you installed any DVD codec, e.g. Power DVD, InterVedio, Nero Show
Time
etc.?
--
Peter
"Andy W" wrote:
HELP. When there is no disc in the DVD drive it says its a DVD-RW
drive which
is right, but when i put in a DVD it says it is a CD Drive and that
it cant
run it. What should I do.
Yes quite a few, but it mainly does it with blank DVD-R's
.
- Follow-Ups:
- Re: DVD Drive.
- From: Bob Hamel
- Re: DVD Drive.
- Prev by Date: Re: Notebook HDD - 7200 vs. 5400 RPM - noticeable difference?
- Next by Date: override laptop fan speed with acpi
- Previous by thread: Re: Creating a second partition
- Next by thread: Re: DVD Drive.
- Index(es):
Relevant Pages
|
Loading
