Re: Hard drive not showing full capacity
- From: "David Vair" <dvair@xxxxxxxxxxxx>
- Date: Wed, 22 Mar 2006 05:42:25 GMT
Did you use maxblast on it, sometimes the drive overlays can screw things up. Also check your
jumpers on the drive. I also use a Promise card and have had no issues with large drives.
--
Dave Vair
CNE, CNA, MCP, A+, N+
"Kraemer" <Kraemer@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:94AEA1BD-2B1E-4096-BD2F-6E76A21821A7@xxxxxxxxxxxxxxxx
Yes, I am using Disk Management, under Admin tools. I can do this like
change from/to basic disk/dynamic disk, assign drive letter, etc. Everything
seems to work just fine, but I cannot get past 127GB...
"Jim Lewandowski" wrote:
What tool are you using to format/partition? Disk Management in XP (Admin tools)?
JL
"Kraemer" <Kraemer@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6FA56CC6-D8EE-48BD-A2DD-EE4D4712554D@xxxxxxxxxxxxxxxx
Setup: WinXP Pro SP2 - Promise Ultra100TX2 - Maxtor 300GB EIDE HD - Momboard
ATA is saturated, Promise card is in PCI slot, with Maxtor drive only.
How come I cannot get this drive to format / partition anything greater than
127GB?
- It's not LBA support
- It's not Promise PCI card BIOS (btw at boot, the card shows the full
capacity)
.
- References:
- Re: Hard drive not showing full capacity
- From: Jim Lewandowski
- Re: Hard drive not showing full capacity
- Prev by Date: Re: What is the REAL scoop? XP & 4GHZ RAM!!
- Next by Date: Re: Sound card problem
- Previous by thread: Re: Hard drive not showing full capacity
- Next by thread: Re: Hard drive not showing full capacity
- Index(es):
Relevant Pages
|