Re: motherboard
If it's the fan mounted to the CPU's heatsink, then it's critical. If it is
the fan mounted at the back of the case and is not in any way used to cool
the CPU, you can leave the case cover off to keep things semi-cool until you
replace it.
Jim
"Cheila" <arclsvg@xxxxxxx> wrote in message
news:7ED4E26F-87D3-4FD9-A84A-80333DBC2E5A@xxxxxxxxxxxxxxxx
The fan thats on the motherboard stoped working is this critical issue? or
can I replace with no problem, I'm new at replacing part on pc's. Thank
you
--
arclsvg
.
Relevant Pages
- Re: Yet another heat issue
... CPU starts screaming in pre-shutdown agony}. ... The fan only has three connector pins instead of four. ... it came with the heatsink itself, I assumed it shouldn't be a problem. ... considered replacing it with the old heatsink/fan assembly {I replaced ...
(alt.comp.hardware.pc-homebuilt) - Re: Yet another heat issue
... CPU starts screaming in pre-shutdown agony}. ... The fan only has three connector pins instead of four. ... it came with the heatsink itself, I assumed it shouldn't be a problem. ... The old heatsink is too small for the new fan; I've considered replacing it with the old heatsink/fan assembly but... ...
(alt.comp.hardware.pc-homebuilt) - Dimension 8100 Heatsink - How to Replace/Reuse
... Will be replacing the 1.5GHZ processor with a 2.0GHZ processor. ... Sounds like it has thermal tape on it ... Or should I get a new heatsink with fan ...
(alt.sys.pc-clone.dell) - Re: Sony KV-27EXR25 resistor values.
... I was told to add a big heatsink to the STR6301A and it would help - so ... so good after replacing it on a couple of friend's 27EXRs and my ... >above resistors, but can't quite make out the values. ... Thanks, Marc ...
(sci.electronics.repair) |
|
