Re: forgot the cpu

When you reset the CMOS did you use the pins method and maybe forgot to
place them back in their original position??
peter

--
"Those are my principles. If you don't like them I have others."
"mudd" <mudd@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5FEB9114-C2C9-4075-945C-55FAA1D76768@xxxxxxxxxxxxxxxx
i did all of that but still wont boot are even let me in the bios. I think
the bios is shoot not sure yet. AND i put the cpu in my pc to make sureb
it
was good and it lets me bootfully on my pc.I even installed a new battery.

"peter" wrote:

A million reasons why a system wont boot....................
check that all connections are proper and solid.
reset the Cmos by disconnecting power form the wall and removing the
battery
for aprox 5 minutes or look for and reset the jumpers.
Is the CPU properly seated in its socket and the little leaver down??
Did you redo the cooling paste and reseat the fan as well as plug it into
the right header on the mobo??
Did you perchance bent any of the pins on the CPU??

That should give you some things to look at

peter

--
"Those are my principles. If you don't like them I have others."
"mudd" <mudd@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E21E5CCC-7845-497B-9689-FE67701C1554@xxxxxxxxxxxxxxxx
ok the other day i was messing with a friends computer. i took his
computer
apart and put it back to gether but i forgot one majar part the cpu
when i
started the computer it went to the bios menu so i exited thincing it
would
bootup bu after it didnt i looked at the table a saw the cpu i put it
back
in
the computer but now it doent bootup or even alow me to go in the the
bios
menu.
can some one help and thell my why?





.

Relevant Pages

  • Re: forgot the cpu
    ... "Those are my principles. ... HELP PETER ... Is the CPU properly seated in its socket and the little leaver down?? ...
    (microsoft.public.windowsxp.hardware)
  • Re: Reset-Switch for a 8580-111?
    ... A 80826 CPU can't go from protected mode to real mode (no-one at Intel ... the power sense signal should generate a reset signal to all ... segment -- at 40:67h. ...
    (comp.sys.ibm.ps2.hardware)
  • Re: need help w/ multi-threaded, multi-CPU tick count / stopwatch
    ... The problem is that if you need to call Reset in one thread ... CPU safe. ... public sealed class StopWatch ... lock ...
    (microsoft.public.dotnet.languages.csharp)
  • Re: TECH: what the hell is going on with my sys80 CPU!???
    ... clock out of CPU. ... I decided to hook up the reset board that came with the game. ... Mainly just because it was "something else" that plugged into that 40 pin ... that 40 pin header. ...
    (rec.games.pinball)
  • Re: MPC5200 coming out of reset - does it actually work?
    ... not make it out of reset, the highest 3 address lines may be non-0 ... I made the POR longer; ... The PCI clock comes up at 33 MHz regardless of whether the CPU will ... as well as the suggested pulldowns on ...
    (comp.sys.powerpc.tech)
Loading