Maxtor SATA Primary & WinXP...Won't install...


Howdy...

Is there anyone out there who can help me figure out a problem I have
been trying to figure out for a couple of months?!

I swear I am going INSANE! Here I am all excited with a brand new 300gb
SATA drive, right? I've got it all setup as the primary boot drive. SATA
enabled. It's the 2nd to boot up after the DVD drive. I don't have
ANYTHING pluged into the ISA-1, ISA-2 is the dvd but I have had the DVD
on the ISA-1 ALSO to no avail.

I boot from my windows cd, it goes through it paces for a couple of
minutes then I get this message:

"Setup did not find any hard disk drives installed in your computer.

Make sure any hard disk drives are powered on and properly connected
to your computer, and that any disk-related hardware configuration is
correct. This may involve a minufacturer-supplied diagnostic or setup
program.

Setup cannot continue. To quit Setup, press F3."

I have my MAXTOR "MAXBLAST" CD. I did setup the drive, which I was
then told to use my OEM software etc... you know the drill. That is
what I have been trying to do...FOREVER!

I know I am missing something here...A driver or some little trick of
some sort, a script maybe?

Can anyone PLEASE HELP A LADY OUT IN COLORADO???

Thanks So Much,
Cindy


--
cindy.bell
.

Relevant Pages

  • Re: Problems with floppy disk drive
    ... USB flash drives are cute, but too expensive, ... Be aware, upon inserting the CD the XP setup screen may appear, ... >> If the above fails to resolve the issue, try a repair install as ... >> Assuming your system is set to boot from the CD-ROM drive, ...
    (microsoft.public.windowsxp.accessibility)
  • Re: CD or DVD not recognized in windows xp
    ... commercial cd or dvd I get a cd or dvd not recognized with a disk i/o ... Well if I boot into dos or boot to a bootable cd or dvd it works ... I too lost my 2 CD/DVD drives in ...
    (microsoft.public.windowsxp.hardware)
  • Re: .bmp halting setup on certain DVD drives?
    ... My DVD worked as well as the CD's did. ... >> I have two different clients that durring SBS 2003 setup get to the ... >> at each location but it gets to this file and just hangs. ... >> I took one of those drives back to my location to play with it in a test ...
    (microsoft.public.windows.server.sbs)
  • Re: [opensuse] RAID 1 10.3 install doesnt boot
    ... RAID 1 10.3 install doesn't boot ... not reboot from the HDat the midpoint of the install. ... My typical setup is anywhere from 4 to 12 identical drives, each with identical partitioning, 3 primary partitions: ...
    (SuSE)
  • RE: System 32 seems fatal error - help sought
    ... How exactly are you trying to load the XP setup? ... but from your message it sounds like you're starting from DOS and trying to ... Change the boot settings such that the CD-Rom drive with the XP disk is ... > instructions - but my cd drives just don't seem to want to play ball. ...
    (microsoft.public.windowsxp.help_and_support)