Com Port 1 & 2 Not recognizing ISO programmer

I'm having trouble getting an ISO programmer to be recoginzed in my Com
Ports and
I have done the following to try and fix the problem with no luck.

1) Downloaded a program called "Microsoft.NET V1.1 still
"Communications Error!"
2) Tried using Com Port 2 and change setting in to Port 2 still
"Communications Error!"
3) Plug ISO programmer into Com Port 1 and re boot then tried Com Port
2
and re boot still "Communications Error!"
4) Downloaded current Microsoft updates for Window's XP re boot try
both
Port 1 and 2 still "Communications Error!"
5) Went into Control panel Device Manager uninstalled Port 1 & 2 re
boot and
reinstall still "Communications Error!"
6) Went into Control panel Device Manager ensured both Port 1 & 2 are
enabled (they were) still "Communications Error!"
7) Tried one of my "old" ISO programmers (Greenlight Go Programmer) and
still "Communications Error!"
8) Did a system check for Com Port 1 & 2 and computer say's both are
"functioning properly"

At this point I'm lost and not sure what to try next. I'm running
Window's XP and I've tried everything I know.

I have also bought a USB/Port adaptor and same alarm. I have tested the
ISO
on a friends computer and it works fine so I assume its something wrong
with
my computer and not the ISO programmer. Please Help!!!

.

Relevant Pages

  • Re: Com Port 1 & 2 Not recognizing ISO programmer
    ... "Communications Error!" ... Tried using Com Port 2 and change setting in to Port 2 still ... Plug ISO programmer into Com Port 1 and re boot then tried Com Port ...
    (microsoft.public.windowsxp.hardware)
  • Re: Windows XP quiet communications: ports 1100 & 1900
    ... > I recently installed Windows XP to have a look at what MS has been up to. ... > I found some interesting communications of the firewall that I ... > The traffic is UDP from my XP box to/through my firewall. ... > Destination Port of 1900: ...
    (comp.security.firewalls)
  • Re: Simulating a serial (COM) port
    ... When I was learning about serial communications, ... something about a bit in the board that causes a port to act in the same ... > Port Access" posting. ...
    (microsoft.public.vc.language)
  • Re: Unsuccessfull serial communication with CF 2.0
    ... The computer must assert RTS ... The computer communications port must be set to 9600 baud, ... CF 2.0 SerialPort class to send and receive data via serial port? ...
    (microsoft.public.dotnet.framework.compactframework)
Loading