Re: No firewire physical ports
- From: "Yves Leclerc" <yvesleclercNOSPAM@xxxxxxxxxxxx>
- Date: Fri, 27 Jan 2006 16:36:11 -0500
On 27/01/2006 "Jonny" <spamyourself@xxxxxxxxx> wrote:
>Getting a motherboard with onboard firewire. Only has pinouts at two
>locations on the motherboard for firewire. One location is the standard 5X2
>block. This gives me one physical port. The other is a 8X2 block, which
>will provide two physical ports.
>
>Found the stand 5X2 at frontx.com By the time I add the two USB ports, and
>the one firewire; I will have a very expensive front panel for such.
>
>The internal firewire connections do not use the commonly available external
>firewire cable connections at 6 or 4 type connector.
>
>I cannot find the 8X2 connector at all. I can't find a two port firewire
>panel with this connector. Rear type would be okay too for the firewire two
>port.
>
>I did find front panels with external type cable connector for connecting to
>rear out ports. I don't want to butcher cables to fit the internal
>connectors.
>
>Gimme some sites I might not have checked.
>.............
>Jonny
>
>
Check with the motherboard manufacturer first. They may already have a 2 port
Firewire rear bracket.
--
---
Y.
.
- Follow-Ups:
- Re: No firewire physical ports
- From: Jonny
- Re: No firewire physical ports
- References:
- No firewire physical ports
- From: Jonny
- No firewire physical ports
- Prev by Date: Re: Toshiba DVD-Rom SD-R6012 not writing DVD's
- Next by Date: Re: Toshiba DVD-Rom SD-R6012 not writing DVD's
- Previous by thread: No firewire physical ports
- Next by thread: Re: No firewire physical ports
- Index(es):
Relevant Pages
|
