AOpen AX4GE-N motherboard. Has 3 RAM slots for plain old DDR. Bios auto setting was driving original RAM @266MHz or PC2100, 512MB.
Went to crucial website, said motherboard would take PC3200, 400MHz. Bought
two 512MB modules, single sided. Installed both at slots 1 and 2. Bios
still ran RAM @266MHz. Saw both at 1GB total The only manual setting was
the same for speed. Looked at old RAM, its PC2700, double sided.
Tried the old RAM in slot 3, not recognized. Moved new RAM to slots 2 and
3, left out old RAM. PC only saw 512MB.
How can I use all 3 RAM slots on this motherboard?
Re: P5N32-SLI DL ... I am on my third motherboard an 6th set of ram, I also tried patriot DDR 2G8000 and this fails as well. ... In all cases the system locks up after a while and when I run Microsoft's Ram tester I get errors on the LDAP test on the third pass and every pass after that. ... I have loaded the latest beta bios and that has improved things slightly but the system still locks up and the memory tester fails again on the random LDAP test but less frequently. ... Good stability once you get enough power and cooling. ... (alt.comp.periphs.mainboard.asus)
Re: Asus A7V8X-LA not detecting RAM ... I've got a little problem with my RAM.... SR1309UK) has Asus A7V8X-LA motherboard.... the Nforce2 chipset is used with ... It uses a module with 64Mx8 chips,... (alt.comp.hardware.pc-homebuilt)
Re: possible video issue. nothing comes up on screen ... it when you remove the RAM.... The PC case speaker (or a piezoelectric speaker on the motherboard),... is to prove the BIOS code is getting ... You can also try this test for video.... (microsoft.public.windowsxp.hardware)
Re: Making a L440GX+ work (was "Trying to revive a server... AIC-7896 freezes pre-POST compl ... You should be able to update the BIOS from a floppy or cd-rom boot disk.... The general rule with ram is you can run faster ram than you need, just usually wastes money that faster RAM costs. ... That jumper should reset the BIOS to factory defaults to allow it to get through the post and into setup. ... I know this isn't a FreeBSD question really, but I just started up a motherboard with onboard SCSI, and for some odd reason it freezes pre-POST before it attempts to boot and there isn't any way where I can get into the BIOS to change the settings it seems. ... (freebsd-questions)
Re: Making a L440GX+ work (was "Trying to revive a server... AIC-7896 freezes pre-POST compl ... The general rule with ram is you can run faster ram than you need, just usually wastes money that faster RAM costs. ... That jumper should reset the BIOS to factory defaults to allow it to get through the post and into setup. ... I know this isn't a FreeBSD question really, but I just started up a motherboard with onboard SCSI, and for some odd reason it freezes pre-POST before it attempts to boot and there isn't any way where I can get into the BIOS to change the settings it seems. ... (freebsd-questions)
