USB flash drive

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: wrongaddress@xxxxxxx
Date: 30 Dec 2005 18:17:13 -0800

I have a 128mb keychain flash drive that connects to the USB port. It
works fine in WinXP, but I would like to access it under DOS.

I have tried using a DOS 7 floppy boot disk with the recommended diver
(USBASPI.SYS) with no sucess. On bootup, there is a message displayed
to connect the USB device and press enter, but it fails to detect the
drive. The config.sys file reads

DEVICE = USBASPI.SYS /w /v

Any ideas?

-Bill

.

Prev by Date: Re: Is MS Vista supposed to replace XP?
Next by Date: Re: XP Media Center 2004(Motherboard and Video cards)
Previous by thread: Re: XP Media Center 2004(Motherboard and Video cards)
Next by thread: Help--XP won't recognize drivers
Index(es):
- Date
- Thread

Relevant Pages

net use command, a DOS application, and a USB printer
... Someone has asked me how to print from a DOS application to a printer. ... Parallel port converter, but we don't know how to send the print jobs to ... knew of any way to send DOS print jobs to a USB port. ... liable for problems or mishaps that occur from the reader using advice ...
(microsoft.public.windowsxp.hardware)
problem mapping LPT port to USB printer
... that runs the DOS application has the USB printer, ... before running the DOS application - this remaps the LPT2 port ... sharename, it acts like it works upon closing the config window, but if we ... redirected to the USB port? ...
(microsoft.public.windowsxp.help_and_support)
Re: DOS Printing Question
... understands DOS). ... will I be able to print from the DOS program to the dot-matrix printer if ... it's connected to the USB port on the laptop using this converter? ... the printer port and send it to the USB port without any extra hardware. ...
(comp.os.msdos.misc)
Re: USB port use in FreePascal
... device that is connected to a USB port. ... I've no idea how access usb on plain dos. ... Most manufacturers will only make windows drivers nowadays. ...
(comp.lang.pascal.misc)
Re: printing to LPT1 from DOS
... >I have a DOS application that can only print to LPT1. ... >I use a notebook with a printer plugged in to USB port. ... >Can I somehow re-route a command to print to LPT1 from the DOS program into ...
(microsoft.public.windowsxp.help_and_support)