Re: USB Serial Adapters with external V92 modems

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



USB to Serial adaptors don't always work perfectly. The best solution is
probably to add an inexpensive serial port card. See this one for example
http://www.newegg.com/Product/Product.asp?Item=N82E16815104258
--

"wouldbee" <wouldbee@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C62EE1AF-AF62-47DA-8A25-E1B6347BA430@xxxxxxxxxxxxxxxx
>I live in a rural area a have only one phone line. I have been using an
> external serial USR 5686e V92 modem with USR's Internet Call Notification
> program. Modem worked fine and received thee incoming calls ok.
>
> Received a new PC that has no serial port. The internal PCI V92 modem uses
> CXT's MOH for incoming calls and it works fine, but the modem is nowhere
> nearly as solid and quick as the my old ext modem is.
>
> I purchased a cheap USB Serial Adapter installed the driver, connected the
> USR external modem, loaded USR lastest driver. The Modem works great but
> USR's Internet Call Notifications will not detect the incoming calls.
>
> The USB Serial Adapter driver was a Prolific driver so i went to their web
> site downloaded their lastest driver and installed No change.
>
> I have disabled, uninstalled and phyically removed the PCI modem and have
> removed the CXT MOH program. NO help. Tried early USR drivers and XP,s
> driver no help.
>
> I have forced the USB Serial Adapter to COM2 port no help.
>
> I ran the device manager from the command prompt and looked for Ghost
> drivers. I even uninstalled some that were not physically connected no
> help.
>
> Has anyone had any experience with USB Serial Adapters and external V92
> modems?
>
> Windows XP MMC, MSI motherboard (no updates shown at OEM), Athlon 64
> +3500,
> Emachine. Everthing seems to work fine except for being able to use my
> good
> external modem.
>
> There is a world of difference on my long phone line between my external
> modem and any other modem I have tried. That is why i would like to be
> able
> to use it. BTW the two modem connection speed show 45 to 48Kbps with ext
> always the lower and V92 works above 34 i believe.
>
> Thanks
>
>


.



Relevant Pages

  • Re: GSM modem driver with multiplexing
    ... > I need to write a driver for GSM modem connected to serial port. ... > multiplexing is needed because I want to have PPP connection opened and ...
    (microsoft.public.win32.programmer.kernel)
  • GSM modem driver with multiplexing
    ... I need to write a driver for GSM modem connected to serial port. ... driver must implement multiplexing of a serial port. ...
    (microsoft.public.win32.programmer.kernel)
  • GSM modem driver with multiplexing
    ... I need to write a driver for GSM modem connected to serial port. ... driver must implement multiplexing of a serial port. ...
    (microsoft.public.development.device.drivers)
  • Re: GSM modem driver with multiplexing
    ... >> serial device object and switch the modem into the command mode, ... > But how RAS will know about my driver, so I could raise PPP connection? ... the PnP manager to load your filter driver for that device. ... This fakemodem driver fakes a serial port. ...
    (microsoft.public.win32.programmer.kernel)
  • Re: USB Serial Adapters with external V92 modems
    ... > probably to add an inexpensive serial port card. ... Modem worked fine and received thee incoming calls ok. ... >> I purchased a cheap USB Serial Adapter installed the driver, ... >> USR external modem, loaded USR lastest driver. ...
    (microsoft.public.windowsxp.hardware)