Re: PCI USB Card snags!

Tech-Archive recommends: Fix windows errors by optimizing your registry

neil wrote:

What's the make of the PCI card. I know you said it uses a NEC PCI to USB controller, but who makes the card. (I'm guessing there was no driver disk in the box)

Neil

"Julian Pitt" <jdpitt@xxxxxxxxxxxx> wrote in message news:fdqkf.8896$LO4.153@xxxxxxxxxxxxxxxxxxxxxxx


neil wrote:



Are you using a setup disk that came with the card or allowing XP to try to install its own drivers.
Neil
"Julian Pitt" <jdpitt@xxxxxxxxxxxx> wrote in message news:t3kkf.22701$uR.5305@xxxxxxxxxxxxxxxxxxxxxxx



I just fitted a PCI USB 2 card into an old PC I have and I cannot seem to get it to work at all. Does the spec of the old motherboard (Chaintech 5AGM) make it difficult if not impossible. I am running XP SP2 so should it not work ok? The card uses an NEC PCI to USB enhanced host controller B1 but when it finds the drivers they seem to install but I am then greeted with "The device cannot start Code 10". Any help would be very appreciated, thanks.





I am using the drivers with XP and also trying to download the right ones which are proving very difficult to find. Does anyone know where I can get the correct drivers ? Cheers





Right first time Neil, it was an ebay special with no disk of drivers, so what now my friend?
.

Relevant Pages

  • RE: Video adapter wrong recognized
    ... According to the BFG quick install guide PDF it looks like you need to ... if prompted to restart, close all open windows and shut down system, remove ... power, cover, old card.. ... The drivers are Nvidia and should be ok unless you need to update them.. ...
    (microsoft.public.windowsxp.hardware)
  • Re: MCE2005 will not clean install. Help!
    ... Removed sound card, tuner card and on-board firewire (also disabled fw ... Only one SATA HDD for now. ... I didn't have to F6 with drivers on a floppy. ... I didn't have to F6 with drivers and the install went flawlessly. ...
    (microsoft.public.windows.mediacenter)
  • Re: Reinstalling XP Home after hardware upgrade
    ... Uninstall at least the audio and video drivers on my old PC ... Move the drives to the new PC ... Boot the PC and let XP install the new drivers ... Are you referring to a sound card? ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Server 2003 on older machine
    ... 10" which is the same error I was getting with the other card. ... automatically detect and load correct drivers for that card ... Server installs fine with no hangups at all. ... but does not install correct drivers. ...
    (microsoft.public.windows.server.setup)
  • Re: Server 2003 on older machine
    ... Tried a different PCI slot and now it finds it but gives me a "Code ... 10" which is the same error I was getting with the other card. ... automatically detect and load correct drivers for that card ... does not install correct drivers. ...
    (microsoft.public.windows.server.setup)