Re: USB 2 driver problem

Card still in pc, yes.
Chipset. I don't know. Where will it tell me?
Ali PCI is the driver, I think.
Yes, deleted controller, but card is still in pc.
Prior to installing I had usb1. It worked fine.
No error indications in Device manager.
Advent tech support is just about impossible to locate these days. Never
respond.



"Dixonian69" wrote:

> Is the Index USB 2.0 PCI card still in the computer?
> What chipset is on PCI card?
> Ali PCI is the Index PCI card?
> You said deleted ALI controller ( obviously from Device Manager)?
> Did you physically remove from computer?
>
> Did your USB ports work prior to installing PCI card?
>
> There are no devices in Device manger with error indications?
>
> Have you checked with Advent tech support?
>
>
> "philwil" wrote:
>
> > It doesn't matter which one I use, I get an error result. On the one hand my
> > pc says the device is working fine, but when I try to use it I'm told the
> > printer/joystick/whatever can't communicate with the device.
> >
> > I've now deleted the Ali controller, but the VIA one still won't work.
> >
> > Going slightly crazy here.
> >
> >
> >
> > "Dixonian69" wrote:
> >
> > > looks like you have 2 USB controllers, one possibly already on your MB.
> > > So Windows recognized it!!
> > > What device is giving error?
> > > Look at Device Manager?? red or yell mark possibly under unknown device.
> > > Have you installed anything else?
> > >
> > > "philwil" wrote:
> > >
> > > > yes, there are two. one is 'ALi PCI to usb enhanced host controller
> > > > the other is VIA usb2.0 Enhanced Host Controller
> > > >
> > > >
> > > > "Yves Leclerc" wrote:
> > > >
> > > > > Then, is then a USB "enhanced" controller card listed out in the USB section
> > > > > of Device Manager?
> > > > >
> > > > > On 25/11/2005 "philwil" <philwil@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> > > > > >yes, sp2 is installed.
> > > > > >
> > > > > >
> > > > > >"Mike Hall (MS-MVP)" wrote:
> > > > > >
> > > > > >> Phil
> > > > > >>
> > > > > >> Unless you have SP2 installed, USB 2.0 is not an option regardless of what
> > > > > >> you try.. do you have SP2 installed?..
> > > > > >>
> > > > > >> --
> > > > > >> Mike Hall
> > > > > >> MVP - Windows Shell/User
> > > > > >>
> > > > > >>
> > > > > >> "philwil" <philwil@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > > > >> news:04CEE7C6-D8E6-480D-878E-8FEA9C8E855D@xxxxxxxxxxxxxxxx
> > > > > >> >I just installed a USB 2 pci card. All went well, but I'm told my pc
> > > > > >> >doesn't
> > > > > >> > recognise the device. I've tried downloading drivers, and have all latest
> > > > > >> > Win
> > > > > >> > updates (on auto), but I can't get it to function.
> > > > > >> > Card is a Intex.
> > > > > >> > Pc is Advent 3213, Athlon XP 2400, Win XP home, 1gig RAM etc.
> > > > > >> > Any suggestions?
> > > > > >>
> > > > > >>
> > > > > >>
> > > > >
> > > > > --
> > > > > ---
> > > > >
> > > > > Y.
> > > > >
> > > > >
.

Relevant Pages

  • Re: A7V PCI Slots
    ... This board has 5 PCI slots. ... I have tried putting firewire card in slot 2 but even although windows says ... - Programmable Interrupt controller ...
    (alt.comp.periphs.mainboard.asus)
  • Re: external eSata enclosure drive recognition?
    ... I do have a PCI and PCI Express slot available. ... I know it has the ICH9 controller, at least, and NOT the newer ICH9R, ... As it is now, the Dell BIOS ... A separate card can be used two ways. ...
    (microsoft.public.windowsxp.hardware)
  • A7V PCI Slots
    ... This board has 5 PCI slots. ... I have tried putting firewire card in slot 2 but even although windows says ... - Programmable Interrupt controller ... - IRQ holder for PCI steering ...
    (alt.comp.periphs.mainboard.asus)
  • Re: e100 PCI bridge problem
    ... computers by making sure the card is installed on the primary PCI bus. ... The special card that has these 4 ports onboard contains a bridge chip itself which explains the issues. ... 00:02.0 VGA compatible controller: Intel Corp. ...
    (Linux-Kernel)
  • Re: broken re(4)
    ... OF>> Talking about this controller: This is also the only board I am ... OF>> using with PCI cards (and thus with a PCI riser) at all. ... OF>> the riser card when it put the system together. ...
    (freebsd-stable)