Re: ATI driver problem
- From: "John" <John@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 21 Nov 2005 11:15:05 -0800
Bob,
It is possible the X700AGPis switching to an unsupported range.
I have an Iiyama ProLite E481S LCD monitor. I thought it might be the
monitor so I tried a 19" LG CRT but got the same results.
It might be switching out of range for both of these - but how I can't stop
this since the display blanks at the moment I load the drivers.
John
"Bob I" wrote:
> Seems "Tom's Hardware Site" had a lot of grief setting up and testing
> this particular card too! On the other hand is it possible the setup is
> switching to the other VIdeo output and leaving your monitor high and
> dry, or maybe switching to an unsupported range?
>
> John wrote:
>
> > Yes, I've tried the driver from the CD and ATI's site - they both cause the
> > screen to go blank immediately after installation (I believe the PC is still
> > running in the background although I can't tell for sure because there is
> > nothing on the monitor!).
> >
> > I have tried the drivers both with and without the associated catalyst
> > software.
> >
> > John
> >
> >
> >
> > "Jerry" wrote:
> >
> >
> >>There should have been a CD in the box with the video card. Drivers are on
> >>the CD - did you not try them?
> >>
> >>"John" <John@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >>news:C7B6CCEB-06DD-49C2-9894-32999C3F309C@xxxxxxxxxxxxxxxx
> >>
> >>>Yes, I have tried the ATI site for the latest driver and get the same
> >>>problem. I have also carried carried out all the XP updates but with no
> >>>luck.
> >>>
> >>>John
> >>>
> >>>
> >>>
> >>>"Mike Hall (MS-MVP)" wrote:
> >>>
> >>>
> >>>>John
> >>>>
> >>>>Are you trying to install the correct driver for your card?.. is it a new
> >>>>card?.. if it is, do the drivers on the CD not work?.. have you visited
> >>>>the
> >>>>ATI site for the latest drivers?..
> >>>>
> >>>>--
> >>>>Mike Hall
> >>>>MVP - Windows Shell/User
> >>>>
> >>>>
> >>>>"John" <John@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >>>>news:DCF919ED-63A0-4F39-A3B1-494E57125F9E@xxxxxxxxxxxxxxxx
> >>>>
> >>>>>I have just installed a replacement graphics card - an ATI X700. The
> >>>>>card
> >>>>>works poorly with the standard VGA driver however when I install the
> >>>>>ATI
> >>>>>driver the screen blanks out completely. I can remove the driver by
> >>>>>starting
> >>>>>XP in safe mode but that leaves me with poor performing graphics. The
> >>>>>ATI
> >>>>>site is of no use, has nayone had this problem and found a solution?
> >>>>>
> >>>>>thanks
> >>>>>
> >>>>>John
> >>>>
> >>>>
> >>>>
> >>
> >>
>
>
.
- References:
- Re: ATI driver problem
- From: Mike Hall \(MS-MVP\)
- Re: ATI driver problem
- From: Jerry
- Re: ATI driver problem
- From: Bob I
- Re: ATI driver problem
- Prev by Date: Re: Mouse scroll wheel only works in half of applications
- Next by Date: Re: HELP ATA serial drive and XP,
- Previous by thread: Re: ATI driver problem
- Next by thread: Re: ATI driver problem
- Index(es):
Relevant Pages
|
