Re: Windows XP not recognizing Epsonscanner in Device Manager/Cntl

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

More importantly, is it correctly installed? Most USB devices require the
software to be installed first, and hardware connected when the installer
says to...


--
******************************************************
Most learned on these newsgroups
Tumppi, Helsinki, FINLAND
(translations from/to FI not always accurate)
******************************************************




"joyornor@xxxxxxx" <joyornormsncom@xxxxxxxxxxxxxxxxxxxxxxxxx> kirjoitti
viestissä:A2E83F07-4521-4D45-BA11-BF14E2F77221@xxxxxxxxxxxxxxxx
> Scanner is connected by usb. Scanner can only turn on when the system is
> on,
> there is no on button. Hardware is set up with latest updates and windows
> xp
> It is properly connected but still it is not recognized by windows.
>
> thanks, joyce
>
> "jerryrock" wrote:
>
>> Is the scanner connected by usb, firewire or serial port? Is the scanner
>> turned on? Is the Epson software installed? What is your hardware set up?
>>
>> "joyornor@xxxxxxx" wrote:
>>
>> > I have had this recurring problem, scanner is not recognized in my
>> > Windows XP
>> > Control Panel under Scanners and Cameras and also under Device Manager,
>> > Hardware. When I try to use my scanner, it shows that it is not
>> > properly
>> > connected and try again. In other words, windows does not recognize
>> > the
>> > scanner on the system. This happens several times a year, and it is a
>> > !@#$$%^ to try and fix.
>> >
>> > any suggestions, is it wia, drivers, plug and play or what. Do not
>> > have
>> > viruses on computer, etc.
>> >
>> > Any suggestions, has anyone else run into this problem with the Epson
>> > 1650
>> > photo scanner?


.

Relevant Pages

  • Re: XP does not recognize scanner
    ... Is it a USB scanner....? ... If it won't install on theirs either, suspect the scanner has died. ... >> Cari (MS-MVP Printing, Imaging & Hardware) ...
    (microsoft.public.windowsxp.hardware)
  • Re: Windows XP not recognizing Epsonscanner in Device Manager/Cntl
    ... to the usb port. ... also changed different usb ports. ... > software to be installed first, and hardware connected when the installer ... >> Scanner is connected by usb. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Talking to USB
    ... Which APIs should I use to talk to a USB scanner from VB6? ... >commands required for the actual hardware. ...
    (microsoft.public.vb.controls)
  • Re: [opensuse] Scanner operation broken in opensuse 10.2
    ... it also does not find the scanner. ... which might be triggered by unstable working hardware. ... See for example "USB Cable Connection and Additional USB Hubs" at ... AG Nuernberg, HRB 16746, GF: ...
    (SuSE)
  • Re: F7 Kernel 2.6.22.1-33.fc7 USB stick
    ... some bugs (the latest are scanner as user not working). ... And I assume that my early report about USB not working is an early ... updates and report the problems back to the fedora testing lists etc. ... hardware was kind enough to try out the test releases, ...
    (Fedora)