Re: Help, accidentaly unistalling Primary IDE Drivers

dear peterk,
thanks for searching the net for me,

but these are hyperlinks to intel websites for downloading chipset software,
I already have the latest...

sorry but this is not my problem. As you might know, I got problem with
primary and secondary IDE channels, those bundled with windows, and there is
no help installing intel chipset software, 'cause there is no driver for IDE
channels inside Intel's package.... so sorry, but this did not help!

"peterk" wrote:

> Found this on the Intel website
> http://www.intel.com/support/chipsets/sb/cs-015001.htm
> as well as this
> http://www.intel.com/support/chipsets/sb/CS-009241.htm
> hope it helps
> peterk
> --
> Never trust a computer you can't throw out the window. - Steve Wozniak
> "Behnoud" <Behnoud@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:107A6635-05D5-4812-800B-4456F6FC8C25@xxxxxxxxxxxxxxxx
> > Thanks for your guides!
> >
> > But let me make it clear that I know a bit about computer stuff and I know
> > how to simply hit the reinstall button on device properties page, :-)
> >
> > My problem is just far beyond, when the PNP services or me trying to
> > reinstall the drivers for any one of IDE Channels (Not controllers!) the
> > wizard unexpectedly leaves the process and shows "the driver is not
> > intended
> > for this platform" [very important], I should remind, during reinstalling
> > process of every IDE Channel the first thing is to install "atapi.sys",
> > this
> > is where my system fails to install and leaves the process. this shoyuld
> > be
> > clear enough for you...
> >
> > the second thing, I did unistall both 'Intel Ultra-ATA controllers
> > 82801EB'
> > (one for IDE and the other for SATA), and restarted my system to reinstall
> > them automatically. Both controllers installed and prompted for restart,
> > after that it was successful in installing 2 out of 4 IDE channels,
> > Primary
> > and IDE on ATA were my windows is installed on Primary [got two HDDs one
> > on
> > IDE primary master theother one on SATA Primary and one CD-RW on IDE
> > Secondary Master]. the SATA IDE channels did not install. I tried to
> > unistall
> > the controller for SATA once more, nothing happened.
> >
> > Sorry to repeat once again, but my system won't go through simple install
> > process!!
> >
> > Thanks again,
> >
> > "thedon57" wrote:
> >
> >>
> >> Behnoud wrote:
> >> > *Please Help!
> >> >
> >> > I did unistall the 2 Primary IDE Drivers (IDE0 and SATA0), I wnated
> >> > to get
> >> > out of conflice between my IDE Controllers and my Onboard Sound
> >> > Device.
> >> > ""Gigabyte 8IG1000Pro-G rev1.2 motherboard with 865G Intel Chipset
> >> > supporting
> >> > AC'97 Audio from Realtek Onboard"" this is My configuration. Sometime
> >> > in the
> >> > past, I'd been hearing sound problems when trying to burn CD's or
> >> > Copy
> >> > contents to Harddrive, I unistalled the Secondary IDE and Reinstalled
> >> > (it was
> >> > very hard to reistall!) and the problem was gone. Now. I have the
> >> > same
> >> > Problem with My Harddrives, so I did Unistall both primary IDEs and I
> >> > cannot
> >> > install them anymore. It says: "Code 28 - the driver is not intended
> >> > for the
> >> > platform" and the driver remains as IDE Channel with a yellow
> >> > exclamation
> >> > mark.
> >> >
> >> > Does anybody know what should I do now? I cannot remember the process
> >> > of
> >> > installing the Secondary IDE now. It got a trick I think...
> >> >
> >> > Thanks *
> >>
> >> Hi make your secondary IDE the slave and connect it to the other socket
> >> on the ribbon.
> >>
> >> Now the computer when you start it up shoul find it.
> >>
> >> If you still get the code 28 this is what it means The drivers for this
> >> device are not installed.
> >>
> >> Goto device manager and click on the yellow mark this should install
> >> the driver for that IDE, if it does not then download a compatible
> >> driver for the device, click the Update Driver button and follow the
> >> wizards prompts to install the new driver.
> >>
> >> Hope this helps you.
> >>
> >>
> >>
> >> --
> >> thedon57
> >> ------------------------------------------------------------------------
> >> Posted via http://www.mcse.ms
> >> ------------------------------------------------------------------------
> >> View this thread: http://www.mcse.ms/message1817704.html
> >>
> >>
>
>
>
.