Re: usb mass storage device code 10

Did you format the drive in Disk Management ?

"Mojee" <Mojee@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E7624546-1079-4007-A8C1-CD6BC5F77654@xxxxxxxxxxxxxxxx
>I am facing a similar problem here. I have USB2.0 Portable Harddisk when
> connected to USB ports on PCs or Laptops do idicate that a newharware is
> connected. But you cannot find the device when you look in my computer or
> try
> and send a file to it. For USB stick 256M it works fine. Please Help
>
> "Mridul" wrote:
>
>> Hi,
>>
>> I got it to work... I was moving to a new apt the prev. day, and the move
>> possibly jogged some connection in the external drive. I just removed the
>> HDD
>> from the external case & put it back in again. It worked.
>>
>> Hope this helps..
>> Mridul.
>>
>> "edrocker" wrote:
>>
>> > I am having ths same problem. I have a Western Digital External USB
>> > Hard
>> > Drive. Running XP SP2 on a P4 2.53 GHz CPU, Intel MB with 1G RAM. The
>> > drive
>> > was fine and I'm not sure when the problem started. When connecting,
>> > it
>> > originally showed up in my Device Manger as another Hard Drive, but
>> > upon
>> > rebooting, it shows up as a USB Mass Storage Device with the little
>> > yellow
>> > marker and a Code 10 saying it is unable to start. According to WD, it
>> > should be Plug and Play and XP should recognize the drive, which it did
>> > when
>> > I first installed it over a year ago. I've tried everything, including
>> > connecting it to another XP SP2 computer, but get the same message.
>> > Any
>> > ideas out there? Thanks.
>> >
>> > "Mridul" wrote:
>> >
>> > > Hi,
>> > >
>> > > My external HDD was working fine until yesterday. Windows installed a
>> > > few
>> > > updates, and now the computer won't boot up if the external HDD is
>> > > turned on.
>> > > If I turn it on after booting, in the hardware manager, it shows up
>> > > with the
>> > > exclamation point, and a code 10. (The device cannot start).
>> > >
>> > > I already have sp2 installed, and have everything pretty much up to
>> > > date.
>> > > The usbstor.sys file is dated 7/1/2001.
>> > >
>> > > Regards,
>> > > Mridul.


.

Relevant Pages

  • Re: External Drive Crashing ... AGAIN
    ... this Seagate external HD with two different units. ... Plugged the device into a different USB port on your computer? ... I have used the USB sparingly and have used the firewire connector ... Connecting another USB device while the external HD is connected should ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: USB port bad on Epson Stylus Photo 890?
    ... parallel printer cable and my computer connected via a USB cable. ... connecting the printer to each of the computers in turn but still no ... Server Properties and Drivers; select any and all driver entries ... are directly soldered to a circuit board and can develop poor/broken tracks on ...
    (comp.periphs.printers)
  • Re: Using USB and Visor module
    ... > I am a bit stuck with connecting the Palm TX via the ... > USB to my Debian system. ... the default use of pilot-xfer for me doesn't work. ... plug in the Palm and let it settle for a second or two ...
    (Debian-User)
  • Re: USB port bad on Epson Stylus Photo 890?
    ... parallel printer cable and my computer connected via a USB cable. ... different USB port on my computer and it still didn't work. ... connecting the printer to each of the computers in turn but still no ... Server Properties and Drivers; ...
    (comp.periphs.printers)
  • Re: Printer
    ... has both parallel and USB so the RPC feeds the parallel port and the PC ... PC driver and on out through the!Printers network. ... A simple matter of connecting ... Just to add here a note about HP's on board chipped cartridges ...
    (comp.sys.acorn.hardware)