Re: cd-rw problem
- From: Bob I <birelan@xxxxxxxxx>
- Date: Wed, 27 Jul 2005 07:37:44 -0500
Sorry Andrew E. but a normal floppy cable is 34 pins and wires. A "normal" IDE cable is 40 pins and 40 wires.
Andrew E. wrote:
Both an 80 or a 40 will work however an 80 will improve transfer rate,a 40
is typically found and used on a floppy drive.
"ken" wrote:
i am having trouble with the drive reading some disks my dvd rom does not read any type of disk and the cd rw will read some and not others if i burn a disk it will not read the disk afterwards but another computer will this is the message i get from the event viewer Details Product: Windows Operating System ID: 11 Source: Cdrom Version: 5.2 Symbolic Name: IO_ERR_CONTROLLER_ERROR Message: The driver detected a controller error on %1. Explanation This problem is typically caused by a failing cable that connects the drive to the computer.
User Action Replace the cable.
my question is does it matter if i use a 40 pin 40 wire ide cable or a 40 pin 80 wire ide cable? thanks for any help
ken
.
- References:
- cd-rw problem
- From: ken
- RE: cd-rw problem
- From: Andrew E.
- cd-rw problem
- Prev by Date: Re: Wireless Optical Mouse 2.0
- Next by Date: Re: Mouse keeps dying - batteries fine
- Previous by thread: RE: cd-rw problem
- Next by thread: Wireless Optical Mouse 2.0
- Index(es):
Relevant Pages
|
