RE: IEEE1394 code 10

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

sorry for the lack of information new at this. so hoefully i am now giving
you the right information. This is a card which i put into an empty slot.
It has P1394A OHCI link and PHY core function, compliant with IEEE 1394-1995
standard for high proformance Serial Bus, supliment 4.0, Complies with 1394
OpenHCI specifications V1.0 and V1.1, compliant with PCI specification 2.2.
Got all the above information from the box.
I did get the error message (code 10) from the device manage, when deleting
and reinstalling it via the device manage the computer does find the new
hardward but the an exclamation mark in a yellow square appears by the side
of the description of it. again in Device manager.
Not sure if its a PCMCIA card or PCI card .
Again i apoligise if my question is still vague theres alot i dont
understand, but i have had this problem since i installed it 5 months agao
and would appreciate any help.
Thank you
Tami
--
Tami


"Tami" wrote:

> I installed a NEC IEEE 1394 it says this device cannot start (code 10) i have
> tried uninstalling and reinstalling it but with no luck,,any ideas?
> --
> Tami
.

Relevant Pages

  • Re: IEEE1394 code 10
    ... This is a card which i put into an empty slot. ... > It has P1394A OHCI link and PHY core function, compliant with IEEE ... > and reinstalling it via the device manage the computer does find the new ...
    (microsoft.public.windowsxp.hardware)
  • Re: FOAK: An interesting little challenge
    ... territories where credit card fraud is most rife. ... card details, so it's not like every single system has to be compliant. ...
    (uk.rec.motorcycles)
  • Updates causing problems
    ... Linksys on how to open the ports you need for that card. ... >try reinstalling my web browser, ... >caonnect to the Internet thru a Linksys Wireless PCI card ... Did you try reinstalling your web ...
    (microsoft.public.windowsxp.general)
  • Re: No sound after reinstall
    ... try reinstalling the Audigy Card. ... I also removed a Soundblaster Audigy sound card ... speakers and there was no sound problem. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Forcing XP to put PCI Ethernet Card on IRQ 11
    ... Make sure that you have no ghosted network adapters: http://support.microsoft.com/kb/269155 ... If it still gives you problem try uninstalling and reinstalling the adapter. ... the card and install the drivers. ... But when it occasionally puts it on IRQ 4, ...
    (microsoft.public.windowsxp.help_and_support)