Re: ATI Video Card problem.

There is a video card related option in BIOS to declare which card is
supported at Boot. Suggest you try it if you haven't already done so. Also
the Asus site does show a chipset driver update as well as BIOS updates.


"Anibal" <nospam@xxxxxxxxxxxxx> wrote in message
news:ei$PFaviFHA.1204@xxxxxxxxxxxxxxxxxxxxxxx
> Hi,
> I have problems installing an ATI Radeon 9600 Pro 256 Mbs video card.
> The problem is that the monitor stays allways in stand by mode and it
> doesn't start even if i try to turn it on manually, if i do that, it come
> back to stand by mode.
> I have to take out the card from the AGP slot and conect the monitor to
> the
> integrated video (ATI 9200) conector in order to make it work.
>
> I check in thye bios config utillity and in the MB manual and there is no
> config to disable the on-board video.
> The Radeon 9600 card is well installed fisically and functioning, the fun
> works as i turn on the computer and as i said, when i conect the monitor
> to
> its conector, the monitor correctly enters in stand by mode (the problem
> is
> that it stays in that mode after starting the computer).
>
> My MotherBoard: "Asus P4R800-VM"
> My Bios: "AMI Bios" updated with the last update.
>
>
>


.

Relevant Pages

  • Re: New PCI card - cannot see anything in monitor
    ... graphics adapter, rebooted my box, set my PCI card as default in my ... BIOS and everything is working fine now! ... came with it and I have a new PCI video card I bought and installed ... I have set it to use the PCI card. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: New PCI card - cannot see anything in monitor
    ... graphics adapter, rebooted my box, set my PCI card as default in my ... BIOS and everything is working fine now! ... came with it and I have a new PCI video card I bought and installed ... I have set it to use the PCI card. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Power, but no bios
    ... memory cards and the bios battery - still nothing. ... If they added a video card to it they may have disabled the onboard ... You don't use jumpers to control video, ...
    (uk.comp.homebuilt)
  • Re: Cant start Windows after installing new motherboard!!!
    ... Once you get the BIOS ... The graphics card and motherboard are both brand new and from the same ... Since installing those into the case XP has been ... That's a dead video card! ...
    (microsoft.public.windowsxp.general)
  • Re: ATI Video Card problem.
    ... > video card. ... > The problem is that the monitor stays allways in stand by mode ... > I have to take out the card from the AGP slot and conect the ...
    (microsoft.public.windowsxp.hardware)