Re: Cleaning

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

"" wrote:
> I want to ask how I am suppose to blow the inside components
> of my pc using
> compressed air, because wouldn't the dust go in the pc even
> more when I blow
> it? How am I suppose to blow it out? Blow behind the dust so
> the air would
> repel and blow it out?
>
>
> Is this a good method for ESD precautions (without a gounding
> strap):
> - Not working on a carpet
> - Not wearing footwear
> - Working on a wooden table
> - Touch the back of the computer before opening it
> - Touch the Metal Case of the Power Supply (inside) frequently
> while the
> computer is open
> - Not moving on the floor too much
>
> I'd do this at the basement, but it's hard enough to just get
> down there.

Well, you dont have to worry about statici as long as you your self do
not touch any thingin the computer, the best method of removing dust
is to use a can of compresed air to blow it out, or electronic air
blower. once all the diust apears to be free from the compoants in th
case, use a vacume cleaner to remove it from the case, again dont
touch any thing with the vac, although it dose seem unlikly that you
will brake any thing by touching then with the vac hose, but take
care. And thats it, if you are worid about dust getting into your PC,
you should consider getting a dust filter for any air intake fans, or
(if like me) your too cheap to get one, just get a thing tishue and
fit that ofer the air intake hole :P

--
Posted using the http://www.windowsforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.windowsforumz.com/Hardware-Cleaning-ftopict555619.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.windowsforumz.com/eform.php?p=1765909
.

Relevant Pages

  • Re: OT: Suggestions?
    ... made the following declaration and shocked the ... -0400 it was announced to all in a public briefing, ... I've used air compressors all the time to clean out a computer.. ... It's my uber dust blaster. ...
    (alt.2600)
  • Re: dust problem
    ... Built a ambient dust collector to filter the dust floating in the ... I'm also thinking about venting the dust/chips from my cyclone ... My shop is 24x32x8 high and in the country, ... Can I build a exhaust fan unit to discharge dusty air from my shop ...
    (rec.crafts.woodturning)
  • Re: air purifiers
    ... BTW, the last time I posted a question about allergies and my granddaughter, I very VERY much appreciated all of your answers. ... Stopped using the ionizer feature that produced the ozone but continued using the filter feature, ... I guess I wasn't the only one having problems as they had someone run some tests on the device and the room air. ... It really kept the furniture cleaner, much less dust, except around the device where it deposited granular dirt. ...
    (sci.med.transcription)
  • Re: Solar-Heated Workshop (more)
    ... Those panels were the first of a new design, and the convective air ... | In my line of work, dust is a bitch. ... flow of room air through the panel). ... What can't be seen in the photos is that the absorber/heat exchanger ...
    (rec.woodworking)
  • Re: Small "Uber Case" recommendation?
    ... and dust filters (I am currently doing devlopment work in Afghanistan ... First is NO AIR FILTERS. ... My reasoning is that in Afghanistan, talking with people who have been there, you are GOING to get dust in the system, even with air filters. ... Air filters restrict airflow which means more fans are needed which means more dust pulled in, ...
    (alt.comp.hardware.pc-homebuilt)