Having a hard time installing Iomega Jaz
Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance
Sunny,
I can't thank you enough!!
ammmum
ammmum Wrote:
> I have a new Dell computer with OS Windows XP home. I just installed my
> old Iomega Jaz drive and SCSI card. The Jaz drive is not located in My
> Computer. The Jaz drive is, however, located in Device Manager in Disk
> drives as ?Iomega Jaz 1GB SCSI Disk Device.?
>
> During the up boot process the Jazz and SCSI card are identified
> properly.
>
> I have an Adaptec AHA-2940AU PCI SCSI controller.
> ? Device type: SCSI and RAID controllers
> ? Manufacturer: Adaptec
> ? Location: PCI slot 3 (PCI bus 1, device 2, function 0)
>
> Windows XP automatically installed the drive with it's drivers. In
> Properties both SCSI and Jaz have "The Device is working properly."
>
> Thank you in advance, for any suggestions to assign a letter to my Jaz
> drive. I've been trying to figure this out for two days now.
>
> Elizabeth
--
ammmum
.
Relevant Pages
- Re: Problem installing XP with SCSI Machine
... and it load windows great - STar Craft loads up in seconds! ... the full version on windows XP just wont get beyond formating. ... you've got your SCSI bus terminator block plugged in. ... set to be a boot device, but is third in line - CD, Floppy, the HArd ...
(microsoft.public.windowsxp.general) - Re: Problem installing XP with SCSI Machine
... and it load windows great - STar Craft loads up in seconds! ... you've got your SCSI bus terminator block plugged in. ... set to be a boot device, but is third in line - CD, Floppy, the HArd ... I try to use the current Windows formatting, or format it again, it ...
(microsoft.public.windowsxp.general) - Re: Problem installing XP with SCSI Machine
... and it load windows great - STar Craft loads up in seconds! ... you've got your SCSI bus terminator block plugged in. ... set to be a boot device, but is third in line - CD, Floppy, the HArd ... I try to use the current Windows formatting, or format it again, it ...
(microsoft.public.windowsxp.general) - Re: (aic78xx) ReBoot Problem
... |>> aic78xx.mpd driver for the other card, and always crashes at that point. ... |>> SCSI MECHANIC BootLog of 3 AHA cards: ... |>> Cmd Status: 1 Error! ... That's not really interesting since what the BIOS possibly does before windows don't know. ...
(comp.periphs.scsi) - Re: SCSI Problem
... FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm. ... >>> Adaptec AHA-2930CU PCI SCSI Adapter ... >>> USB 2.0 PCI ... When I>>> insert a CD of any type in any drive, the drives just grind away for a few ...
(microsoft.public.windowsxp.help_and_support) |
|
