Re: USB 2 PCI board problems
- From: "R. McCarty" <PcEngWork-NoSpam_@xxxxxxxxxxxxxx>
- Date: Sat, 25 Jun 2005 07:09:42 -0400
Which PCI slot did you install the card into ? Numbering
schemes vary but usually PCI Slot #1 is designated as the
one adjacent to the AGP slot. XP can handle IRQ sharing
and your motherboard probably has an APIC controller
that raises IRQ mapping to #23. I'm a little out of touch
with the newer boards, but on previous MBs Slots #2 &
#5 have independent IRQ mappings.
Are you continuing to use the motherboard based USB
channels or just using your new USB2.0 ? You may want
to disable the motherboard USB channels (Via BIOS).
"F" <news@xxxxxxxxxxxxxxxxxxx> wrote in message
news:42bd3836$0$41891$ed2619ec@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Ever since I installed a USB 2 PCI board (NEC chipset) on my Asus AV266-E
> motherboard running Win XP Pro SP2 I've had random lockups. Sometimes when
> booting up, sometimes when shutting down, other times when opening a
> folder or when inserting a memory card into a USB 2 card reader.
>
> Any suggestions by way of a solution? I have reloaded the Microsoft USB
> 2.0 driver and have installed the latest Via update.
>
> --
> F
>
> (Beware of spam trap - remove the negative)
.
- Follow-Ups:
- Re: USB 2 PCI board problems
- From: F
- Re: USB 2 PCI board problems
- Prev by Date: USB Problems
- Next by Date: Re: USB 2 PCI board problems
- Previous by thread: USB Problems
- Next by thread: Re: USB 2 PCI board problems
- Index(es):
Relevant Pages
|
