Re: DVD-RW after upgrade to AMD64

A friend told me to try to changedriver controller properties, to PIO Mode.
What do you think about?

"NoNoBadDog!" <no_@xxxxxxxxxxxxxxxx> wrote in message
news:O1DlQdjcFHA.2436@xxxxxxxxxxxxxxxxxxxxxxx
>
> "Flavio Borup" <fborup@xxxxxxxxxxx> wrote in message
> news:u1bMg8icFHA.3204@xxxxxxxxxxxxxxxxxxxxxxx
> > Strange problem:
> > before: Athlon XP 1400 GHz ASUS A7A266 e XP SP1 ou SP2 Ingles + vanilla
> > 350W power
> > After: AMD64 3000+ ABIT NF8 XP SP2 PT_BR + good 350W Seventeen
> >
> > both
> > HD 40 GB Pri Master C:
> > CD-RW Sec Mas d:
> > DVD-RW Sec Slave e:
> >
> > The problem: My CD-RW is OK, but the DVD-RW have several errors (65
event
> > IDs 11 during a falure) and I/O error during copy (in my native
language:
> > "O driver detectou um erro de controlador em \Device\CdRom" and "A
> > solicitação não pôde ser executada devido a um erro do dispositivo de
E/S"
> >
> > I've tried to stop all services, change bios settings, change flat
cable,
> > different copy utilities.update drivers, change drives position on
cables
> > but...
> >
> > certain files can be copied only in SAFE MODE?!?!?!?
> >
> > If i try to boot a normal XP system, 70% of the files are copied without
> > problem, but some files (the same files, ever) have problems in copying.
> >
> > But why in safe mode, the problem does not appear?
> >
> >
> >
> Use the drives in Cable Select with a known good 80 wire 40 pin ribbon
> cable.
> Blue = Motherboard
> Black = Master
> Gray = Slave
>
> Make sure the jumpers on both drives are set to cable select.
>
> Most modern motherboards don't really like having the drives set to
> master/slave using jumpers.
>
> Bobby
>
>


.

Relevant Pages

  • Re: "error loading operating system"
    ... I generally try to use 80 wire cables (because the signal ... it would be jumpered as Master. ... Since the drives are the only thing on the ... Cable_Select is an alternative jumpering method, ...
    (microsoft.public.windowsxp.hardware)
  • Re: "error loading operating system"
    ... I generally try to use 80 wire cables (because the signal ... it would be jumpered as Master. ... Since the drives are the only thing on the ... Cable_Select is an alternative jumpering method, ...
    (microsoft.public.windowsxp.hardware)
  • Re: Fedora vs. Ubuntu (hijacked: can I dual boot FC and Kubuntu?)
    ... experience with data corruption that they attributed to using master and ... legend on modern drives that tells you where the jumpers should go. ... drives now require 80 wire cables, which are not the same as the old standard ... install your Linux distros. ...
    (Fedora)
  • Re: My new A8N-SLI Premium: IDE detection problems, DMA failure. Hardware fault?
    ... this machine was set up with a DVD-ROM as Master on the 1st IDE ... I swapped in another 80-pin cable for that IDE channel. ... I swapped cables yet again, ... Once the OS is up, I have no DMA on any drives, and can't ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Cannot use fourth IDE HDD with FC3 ?
    ... I change it to master and slave on both IDE but there is still some ... Two drives on different cables should both be their own masters, ... Also check both cables individually. ...
    (Fedora)