Re: DVD-RW after upgrade to AMD64


"Flavio Borup" <fborup@xxxxxxxxxxx> wrote in message
news:u1bMg8icFHA.3204@xxxxxxxxxxxxxxxxxxxxxxx
> Strange problem:
> before: Athlon XP 1400 GHz ASUS A7A266 e XP SP1 ou SP2 Ingles + vanilla
> 350W power
> After: AMD64 3000+ ABIT NF8 XP SP2 PT_BR + good 350W Seventeen
>
> both
> HD 40 GB Pri Master C:
> CD-RW Sec Mas d:
> DVD-RW Sec Slave e:
>
> The problem: My CD-RW is OK, but the DVD-RW have several errors (65 event
> IDs 11 during a falure) and I/O error during copy (in my native language:
> "O driver detectou um erro de controlador em \Device\CdRom" and "A
> solicitação não pôde ser executada devido a um erro do dispositivo de E/S"
>
> I've tried to stop all services, change bios settings, change flat cable,
> different copy utilities.update drivers, change drives position on cables
> but...
>
> certain files can be copied only in SAFE MODE?!?!?!?
>
> If i try to boot a normal XP system, 70% of the files are copied without
> problem, but some files (the same files, ever) have problems in copying.
>
> But why in safe mode, the problem does not appear?
>
>
>
Use the drives in Cable Select with a known good 80 wire 40 pin ribbon
cable.
Blue = Motherboard
Black = Master
Gray = Slave

Make sure the jumpers on both drives are set to cable select.

Most modern motherboards don't really like having the drives set to
master/slave using jumpers.

Bobby


.

Relevant Pages

  • Re: Help installing Fedora
    ... Each IDE/ATA channel can support either one or two devices. ... giving each device a designation as either master or slave, ... the reasons why drives don't always "play nicely together" has to do ...
    (comp.os.linux.setup)
  • Re: "error loading operating system"
    ... I generally try to use 80 wire cables (because the signal ... it would be jumpered as Master. ... Since the drives are the only thing on the ... Cable_Select is an alternative jumpering method, ...
    (microsoft.public.windowsxp.hardware)
  • Re: Cannot use fourth IDE HDD with FC3 ?
    ... I change it to master and slave on both IDE but there is still some ... Two drives on different cables should both be their own masters, ... Also check both cables individually. ...
    (Fedora)
  • Re: Upper Lower Filters in XP Registry
    ... I'd just switch the middle and end connectors (moving the drives ... currently have jumpered as Slave should be that way - some drives cannot ... support being a master. ... > the drive to the slave CD and the top connector to the master DVD. ...
    (microsoft.public.win2000.registry)
  • Re: "error loading operating system"
    ... I generally try to use 80 wire cables (because the signal ... it would be jumpered as Master. ... Since the drives are the only thing on the ... Cable_Select is an alternative jumpering method, ...
    (microsoft.public.windowsxp.hardware)