Installing Memory Problem

I'm having problems installing Ram in a computer I'm building. I'm a novice
builder and don't know too much about DDR Ram. My problem is that I can get
the system to Post with one stick of ram installed but when I try to add
another, the system won't Post. The MB is a Chaintech CT-7NJL6 and has three
DDR Ram banks (rated for 266/333/400 MHz). I've got two 256MB, 266MHz sticks
that I want to put in. They are the correct memory sticks for the MB. The
MB manual says "For maximized performance DUAL-CHANNEL (128-bit) results, you
must install one of your two memory modules on DDR3.

I've tried all the combinations: DDR1 and DDR3, DDR2 and DDR3, DDR1 and
DDR2 none of the combinations work. If I put just one stick of memory in,
the computer Posts. (I've tried each memory stick so I know both work)

In the Cmos stettings under "Frequency/Voltage Control", I have the FSB set
at 133MHz. The "Memory Frequency" is set at AUTO as recommended. The "FSB
SPREAD SPECTRUM" is set at .50% (choices are .50% or 1.00%)

Any help or suggestions will be greatly appreciated. Thank you. Mack

--
MacKenrick
.

Relevant Pages

  • Buying from Ebay is it worth the risks?
    ... and my Packard Bell Laptop R 8750 12 months old by 1 GB RAM too ... Is buying from Ebay worth it could I wreck my Pc by installing substand ... memory thats assuming I am sold Counterfeits or Fakes which I am told ... The seller on ebay has 100% feedback and is a powerseller. ...
    (microsoft.public.windowsxp.general)
  • Re: Filling memory of iPaq 2215 with installed apps slow down PPC?
    ... since the program will be loaded into RAM for execution ... >> This is exactly what I do to keep that internal memory usage to low as ... I have absolutely loads of applications installed, ... >>> So then really buying a memory card and installing applications to it ...
    (microsoft.public.pocketpc)
  • Re: VGA Increased from 8 MB to 32 MB after instaling new drivers
    ... Are you actually using the onboard video card? ... amount of System RAM does not matter. ... use the System memory as shared memory. ... but now after installing new drivers i found its size to ...
    (microsoft.public.windowsxp.hardware)
  • Re: Access 97 on XP Pro problems
    ... GB of RAM on the XP machine, ... "Out of Memory" Error Starting Microsoft Access ... Got some weird stuff when installing, ... > Then I ran into whacky un-installs (failed to un- ...
    (microsoft.public.access.gettingstarted)
  • Re: Installing Memory Problem
    ... > I'm having problems installing Ram in a computer I'm building. ... They are the correct memory sticks for the MB. ... > must install one of your two memory modules on DDR3. ...
    (microsoft.public.windowsxp.hardware)