NVIDIA 5200 Cloning & Re-booting problem

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I'm running Windows XP and have an S-Video cable going out of my NVIDIA

5200 graphics card into my TV. In the graphics card properties I set
nView Display Mode to Clone, Primary Display to Analog and Secondary
Display to TV. Everything works just fine but every friggin time I
re-boot the settings get f@cked up. It's like it goes into single
display mode using the TV as the Primary Display. I end up unplugging
the S-Video cable and re-booting. Only problem is that after unplugging

and plugging in the cable I'm wrecking the S-Video pins.

.

Relevant Pages

  • Re: Display problem that I cant grok
    ... the problem persists on the external monitor you know its the graphics card ar fault and you need to replace either the graphics card if its an add on or the worse case scenario is the motherboard, now if the display is ok on the external monitor then try reseating the flex cable at both ends of the LCD if that dont work replace the cable its self or if that fails to work then you need a new LCD panel. ... whose background changed from dark blue to solid red. ...
    (uk.comp.sys.laptops)
  • NVIDIA 5200 Cloning & Re-booting problem
    ... In the graphics card properties I set ... nView Display Mode to Clone, Primary Display to Analog and Secondary ... re-boot the settings get f@cked up. ... Only problem is that after unplugging ...
    (microsoft.public.windows.mediacenter)
  • Re: Radeon 9550 + desktop effects +3d games
    ... I installed the ATI driver as instructed from the how- ... graphics card is not known to be supported by Xgl. ... it messes up my display and I have to turn off Xgl. ...
    (alt.os.linux.suse)
  • Re: Bad quality in Live and Recorded TV...
    ... The problem is that your graphics card has to upscale the standard ... your high resolution display which in the case of a 1920x1080 digital ... their 1080i or 720p high resolution digital channels. ...
    (microsoft.public.windows.mediacenter)
  • Re: Word Pictures and Drawings wont display
    ... Word has always been very hard on graphics card drivers, ... Keeping accurate display of the constantly fluid ... You may want to try turning down the graphics card acceleration ... paint completely or don't paint at all when viewing a .doc file in Word 2003. ...
    (microsoft.public.word.drawing.graphics)