RE: Raid 0 X SCSI

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Sorry,wont work with a SATA drive and/or SCSI.Do a fresh install,use the
file transfer wizard to save settings,youre files.IDE drives
cloning-mirroring
works fine.

"Zalman" wrote:

> Hi all,
>
> Sorry if this has been answered before, I did a search and could not find.
> I have my Windows XP Pro setup and running ok on a RAID 0 configuration (2
> seagate 80gb barracudas).
> I know RAID 0 is not fail safe, so I am planning to buy a SCSI Hard Drive
> and clone my OS to the SCSI using Northon Gosth.
>
> Question: Will that work? I mean, everything is working fiine, if I clone to
> the SCSI will I be able to boot?
> What problems may I face if I ever do this?
> Waiting your answer before rushing to the stores.
>
> Thank you.
>
>
>
.

Relevant Pages

  • RE: lpfc RAID1 device panics when one device goes away
    ... Are we talking about a failure of one of the HBA's or a failure of a drive? ... attached you have, typically, one scsi connection to the raid array, not ... difference being the two "drives" are located on a storage array ...
    (RedHat)
  • Slow Performance on HP DL380 G4 SmartArray 6i Controller
    ... Hi all, I'm very new to SCSI and server hardware in general, so please ... as we only have the one SCSI RAID HBA in the system then I beleive the ... or the drives or cables attached to it. ...
    (comp.periphs.scsi)
  • Re: Confused
    ... I had the same situation in reverse I picked up a bunch of scsi ... and realize that Norton Ghost 12 is your best friend not RAID 5... ... I had a power glitch that failed 2 drives in one of my RAID 5 ... learned to back up critical data to several places and use Norton Ghost. ...
    (comp.periphs.scsi)
  • Re: SATA vs. SCSI, RAID?
    ... Also this would depend on which controller is ... Well MS's intrinsic SW RAID 1 drivers using typical Intel mobo EIDE ... controllers for ATA or Adaptec SCSI non-RAID cards do very well here. ... But do note that I only mentioned "3x drives ...
    (microsoft.public.windows.server.sbs)
  • Re: Raid 0 X SCSI
    ... if one of the drives goes bad with RAID 0 then you will loose all on ... Store the images on a separate drive. ... so I assume it will NOT work if I clone to a real SCSI drive ...
    (microsoft.public.windowsxp.hardware)