Re: USB Drive doesnt like my computer but Everyone else's Please Help



i've been using a usb 1.1 external drive no probs for a couple of years, i
recently bought a usb2 case and had similar problem - turns out after much
experimenting it will work on only 2 of my usb ports - the main two on the
m/board, although the case ports and pci card ports are usb2 it wont work
via them! other usb devices do. Also if i plug my 7 port dlink usb2 hub onto
either of the m/board usb 2 ports the externall drive will not work -
recognised without issue in device manager - but no go.

--
Moon
"Gilberto Trevino" <ewpphoto@xxxxxxxxx> wrote in message
news:uSw9sHDTFHA.2304@xxxxxxxxxxxxxxxxxxxxxxx
> It all started a few weeks ago that my computer stop recognizing my
> Verbatim USB Drive.
> I know it is not the USB Drive cause it works in other computers and I
> don't think it is the port either since I can still connect my digital
> camera, scanner and other usb devices and they all get recognized.
>
> Been looking for its driver for windows xp but all I was able to find was
> the one for the Win98 SE. I also tried reinstalling the USB controllers
> without luck. Please help I dont know what else to do.
>
> Has anyone had this kind of problem before?
> Thanks in advance
>


.



Relevant Pages

  • Re: AHCI - remove probing of ata2
    ... ACPI: bus type pci registered ... registered new interface driver hub ... USB Universal Host Controller Interface driver v3.0 ... hub 1-0:1.0: 2 ports detected ...
    (Linux-Kernel)
  • Re: Help interpreting AHCI failure messages
    ... investigate I decided to try putting the root fs on a usb memory stick ... PERCPU: Allocating 57344 bytes of per cpu data ... registered new interface driver hub ... hub 1-0:1.0: 6 ports detected ...
    (Linux-Kernel)
  • Usb problems on 7.0 RELEASE
    ... Earlier I reported usb problems on this list. ... 686-class CPU) ... <Enhanced SpeedStep Frequency Control> on cpu0 ... 2 ports with 2 removable, ...
    (freebsd-stable)
  • Re: Frequent USB mouse disconnections under load with RELENG_7]
    ... disconnections of the mice. ... A mouse attached via a second pair of USB ports, ...
    (freebsd-stable)
  • OOPS in 2.6.19.1, connected to nfs4 and autofs4
    ... ACPI: Local APIC address 0xfee00000 ... Linux Plug and Play Support v0.97 Adam Belay ... USB Universal Host Controller Interface driver v3.0 ... hub 1-0:1.0: 2 ports detected ...
    (Linux-Kernel)