Re: Constant restarting and not completely booting



My update on the "restart on shut down problem" was the use of a Linksys
Wireless A+G Dual Band WMP55AG PCI Adapter. Either because I set it up with
the wrong parameters or it is incompatible with my Wireless Router WRT54G
(not dual band). I installed a Linksys Wireless-G WMP54G PCI Adapter and
the PC now shuts down properly. The reason I did not use it initially was
Linksys had packed it with a driver CD for Taiwan Language. I reported it
to Linksys several weeks ago and never received a reply so I bought the Dual
Band WMP55AG card. I solved the WMP54G problem by finding a proper driver
for it.
As I stated previously, there are many unsuspecting causes to the restart on
shutdown problem. Hope sharing this individual solution helps someone.
Al C.


"ACee" <hmac29@xxxxxxxxxxx> wrote in message
news:%23WqguUrSFHA.244@xxxxxxxxxxxxxxxxxxxxxxx
>I am experiencing the auto restart after requesting shutdown. I have
>followed up and tried every pertinent thing I could find searching the web.
>I have now reformatted the hard drive and re-installed WindowsXP back to
>the 2002 version and still have the problem with each of the many updates.
>I finally installed Norton SystemWorks Premier and ran the Win Disk Doctor
>which found a lot of registry entry problems and repaired them. Then I
>rebooted and the shutdown worked properly. I was elated at that and
>thought I had the problem fixed. See next paragraph.
>
> I have received one hint of the cause relatively to re-installing the
> Cisco WMP55AG WI-Fi card. I had left the card installed while I was doing
> all of the above and then installed the driver and the card would not work
> because the driver has to be installed before the card is installed. I
> took the card out and un-installed the driver that was installed in the
> improper order rebooting each time. I installed the driver and shut down
> the computer and was proceeding to insert the Wi-Fi card in the slot and
> just as I was getting it engaged I saw the LED light up on the motherboard
> and the machine proceeded to automatically start. I had left the power to
> the computer from the master switch on (I shut down with only the PC
> switch). The auto start problem on shut down has been consistent since
> installing the WI-Fi card.
>
> I have downloaded the Wi-Fi card driver from the Cisco site but have been
> reluctant to install it because the date does not seem to be any later
> than the driver date from the install disk for the card. The Wi-Fi card
> is a recent purchase. I suppose I will be doing that as soon as I get the
> time in order to see if it will solve the problem.
>
> Yes, I have followed the MS procedure for KB320299, run the Symantec
> (Norton) Speed Disk; Win-Doctor and Disk Doctor several times. As some do
> and some do not, I do not receive an error message when the PC is
> auto-restarting. I am dismayed, to say the least, about a fix because I
> have seen so many methods of successfully fixing the problem and many who
> have found no solution to the problem. To me that makes it a frustrating
> situation. Do not let the expeerience of others sway you from trying a
> solution that did not work for someone else, it may work for you.
>
> I have run PC Doctor which seems to be a comprehensive program and it
> found no problems.
>
> I have had several versions of Roxio CD Creator up to the latest version
> installed and had no problems until lately when I converted the web access
> from hard wire BB access to the Wi-Fi access. I did however, remove the
> Roxio program with subsequent cleanup of the registry entries with no
> solution to the auto startup problem. Some early versions of the Roxio
> program did give the auto start problem to some people. I have never
> experienced any problems relative to this subject.
>
> My PC is an IBM NetVista of 2002 vintage. It is the first IBM model I
> have switched to Wi-Fi. Could it be, per chance, the on board battery? I
> have not renewed it but have seen no other indications of it becoming
> weak. My past experience of a bad battery causes all kinds of havoc.
>
> There is another thread going about this subject in the MS Public
> WinXP-General group. If you do a search you will see many discussions
> about the subject in other newsgroups out side of the MS groups.
>
> I have not seen any mention of a Wi-Fi installation or a bad battery
> causing this problem so I suppose I am adding to the confusion.
>
> If anyone has anything to suggest about my specific problem I will be
> appreciative of seeing it.
>
> Al C.
>
>
>
> "Donald L. Hoffpauir" <DonaldH606@xxxxxxxxxxx> wrote in message
> news:Oq4wJnDRFHA.3708@xxxxxxxxxxxxxxxxxxxxxxx
>> T, the hard drive tested out fine. Don't really know what's going on.
>> Trying other things but nothing has worked so far. But that's one thing
>> off of my list.
>>
>> Thanks!
>> Don
>>
>> "T. Waters" <@$%$%#^@jdjgkl.com> wrote in message
>> news:eT4PR7GPFHA.2132@xxxxxxxxxxxxxxxxxxxxxxx
>>> Possibly this is a problem with your hard drive going bad.
>>> Immediately make sure all your important files are backed up NOW,
>>> Then, you can use the online diagnostic called SeaTools to get a report
>>> on
>>> defects in your HD, even if your hard drive is of another make than
>>> Seagate:
>>> http://www.seagate.com/support/seatools/B7c.html
>>> Post back and let us know how many bad sectors it finds.
>>>
>>> "Donald L. Hoffpauir" <DonaldH606@xxxxxxxxxxx> wrote in message
>>> news:uRCd886OFHA.3380@xxxxxxxxxxxxxxxxxxxxxxx
>>>> When attempting to boot my WinXP system I get to an option screen that
>>>> allows for safe mode booting, etc., mentioning that a recent change in
>>>> hardware or software could have caused this problem.
>>>>
>>>> However, I've had no recent changes so I'm having trouble tracking this
>>>> down. Also, if I choose safe mode and run a scan disk, 9 out of 10
>>>> times
>>> it
>>>> will boot properly.
>>>>
>>>> Has anyone experienced this or have any corrective suggestions?
>>>>
>>>> Thanks!
>>>> Don
>>>>
>>>>
>>>
>>>
>>
>>
>


.



Relevant Pages

  • Re: Sound Blaster Live! Sound card
    ... Creative tends to key their installers to look for the relevent sound card ... and be keyed to detect a same-brand motherboard before they will install. ... the driver you downloaded could be for a different version of SBLive! ...
    (microsoft.public.windowsxp.hardware)
  • Re: Etch AMD64 fun and excitement
    ... So first I installed Etch i386 because I didn't have an AMD64 install ... The broadcom wireless card ... I had to set the "nv" driver by hand. ...
    (Debian-User)
  • Solution found. Yippeeeee!
    ... Now I hope that I can go ahead and install SuSE 10 and then sort out the graphics driver for my laptop screen. ... And then go ahead to adjust things including setting my resolution to 1280x800. ... And one other curious thing has happened: I started with the SuSE 10 LiveDVD and configured my network card to let me get into the Internet. ...
    (alt.os.linux.suse)
  • Re: Additional Info: Lattitude D620 Inbuilt Wireless died
    ... Install wizard. ... The card is enabled in BIOS, ... the latest driver version..... ... codes as reported in the properties box of this device in this ...
    (alt.sys.pc-clone.dell)
  • Re: Constant restarting and not completely booting
    ... I am experiencing the auto restart after requesting shutdown. ... I have received one hint of the cause relatively to re-installing the Cisco WMP55AG WI-Fi card. ... I installed the driver and shut down the computer and was proceeding to insert the Wi-Fi card in the slot and just as I was getting it engaged I saw the LED light up on the motherboard and the machine proceeded to automatically start. ... I have downloaded the Wi-Fi card driver from the Cisco site but have been reluctant to install it because the date does not seem to be any later than the driver date from the install disk for the card. ...
    (microsoft.public.windowsxp.hardware)