Re: ATI 5.3 Driver--Error when trying to play DVD


> It seems that everytime I install INCD it screws up my PC. >

I had the same issue with Nero Express / InCD OEM disk that came with my LG
DVD burner.

Is your copy of InCD an OEM version or did you buy Nero via retail store or
from their website (in which you get a software key)??

If it is OEM I think I can help.

r.





"Lori A. Kuiper" <lorikuiper92@xxxxxxxxxxx> wrote in message
news:%23NfEWVQRFHA.3296@xxxxxxxxxxxxxxxxxxxxxxx
>I already have the newest BIOS, and motherboard drivers for my PC--it is
>only 1 year old.
>
> I am not running ANY antivirus software so that cannot be the problem. I
> am using the built in Windows XP SP2 firewall and have scanned daily with
> online antivirus scanner and my PC is clean. I also ran AD Aware and have
> no spyware.
>
> I already ran the INCD clean tool and the general clean tool before I
> reinstalled Nero. I am running the most current version of Nero-dated
> April 13 or 14th I believe--6612.
>
> It seems that everytime I install INCD it screws up my PC. How do I get
> this to work correctly? If I put a blank CD RW disk in my drive now, I
> get the Nero Smartstart--It does not auto format the CD.
>
> I did all of what you suggested and still have the same trouble
> "Peter" <Peter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:43239ED4-6409-41ED-AF66-528A142ED9FB@xxxxxxxxxxxxxxxx
>> HI,
>>
>> InCD is the packet writing tools for use with the CD/DVD R/W disks.
>> When InCD detected a blank CD/DVD R/W disk, it will format the disk so
>> that
>> you can use the formatted disk as a big floppy disk.
>> It is including in the Nero burning kit.
>> What version of Nero you are using?
>>
>> I think you need to go to add or remove program to remove the nero
>> burning
>> rom and InCD then run msconfig to disable the antivirus software at
>> startup.
>> Reboot the PC and make sure antivirus software is not running at the
>> background then install Nero burning rom and InCD again. Reboot the PC
>> and
>> check to ensure Nero and InCD are working properly. Run msconfig again to
>> reactivate the antivirus software.
>>
>> You may also go to nero.com to download the updates for your nero burning
>> rom and InCD. The latest version for inCD is 4.3.11.1
>>
>> BTW, if you plan to clean install XP again, I would suggest you to be
>> well
>> prepared as follows:
>>
>> 1. download the latest XP compatible chipset drivers, on-board sound
>> chip/Lan drivers from the mobo manufacturer's website
>> 2. download the latest XP compatible drivers for your sound card, vedio
>> card, lan card, etc.
>> 3. download the latest update for Nero burning rom/Nero Express and InCD
>> 4. Burn all the downloaded files to a CDR in different folders so that
>> you
>> can easily install the drivers and update drivers easily.
>>
>> You may also update the mobo BIOS if it is too old for XP but you must be
>> very careful and fully knowledgeable to do this as an improper update of
>> BIOS
>> may turn your PC to a dead stone.
>>
>> Peter
>>
>> "Lori A. Kuiper" wrote:
>>
>>> I have reinstalled the ATI driver 5.4--without the WDM component this
>>> time.
>>> I can burn CD's with Nero and all Nero programs work fine except for the
>>> DVD
>>> player. Now I get 2 messages One says that the Event ID 7 for Incdm
>>> cannot
>>> be found--the local computer may not have the necessary registry
>>> information
>>> or message DLL files to display messages from a remote computer. The
>>> following information is part of the event \Device\MrwR00000000. What
>>> in
>>> the world does this mean???
>>>
>>> There is also another message that says Timed out sending notification
>>> of
>>> target device change to window of
>>> InCD_GUI_MAINFRAME_1A630D67_3515_471D_8D7D_C8E76EC0DA2A.
>>>
>>> I have no idea what this one means either.
>>>
>>> There is no one around here with broadband because it is not available
>>> in my
>>> area. I have downloaded the drivers and then burnt them to CD with my
>>> other
>>> driver files. I just transfer them to my harddrive and install from
>>> there.
>>>
>>> If I reformat and reinstall again and this time install the correct
>>> video
>>> drivers--would that be likely to resolve the problem? I usually install
>>> my
>>> burning software before I update my video drivers. From what your
>>> saying I
>>> should do this after I load my updated video drivers?
>>> "Peter" <Peter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>>> news:ECA4D27D-64E4-4250-8118-DAEDBA7221F1@xxxxxxxxxxxxxxxx
>>> > Hi,
>>> >
>>> > Pls download the user guide from ATI website:
>>> > https://support.ati.com/ics/support/default.asp?deptID=894
>>> >
>>> > Read carefully for all the info contained by the user guide.
>>> > Download the utility tools from ATI to fully remove the old ATI
>>> > stuffs.
>>> > Ask your friend with broadband modem to download and burn the 5.4
>>> > Catalyst
>>> > drivers and burn it to a CD for you to install.
>>> > Care: make sure to download the correct drivers for your card. For
>>> > example,
>>> > if your card is a All-in-wonder card , download the All-in-wonder
>>> > Catalyst
>>> > drivers. If yoyr card is just an ordinary Radeon card, download the
>>> > Radeon
>>> > Catalyst drivers.
>>> > Link:
>>> > https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=27
>>> >
>>> > I would suggest the following ways to re-install the ATI drivers:
>>> >
>>> > 1. Run regedit to delete the upper and lower filters of your
>>> > CD-rom/DVD-rom
>>> > Start/Run/regedit/
>>> >
>>> > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
>>> >
>>> > Right click on the upper filter and then delete.
>>> > Do the same for lower filter, if any.
>>> > Care: Backup the reg. keys before delete the keys, right click on the
>>> > {4D36E965-E325-11CE-BFC1-08002BE10318} and select Export, save the
>>> > file
>>> > for
>>> > reg backup for just in case.
>>> >
>>> > 2. Change the display resolution to VGA mode then reboot.
>>> > 3. Remove all the old ATI stuffs using the utility tools downloaded
>>> > from
>>> > ATI
>>> > Pls read this link:
>>> > https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=27
>>> >
>>> > Below is part of the info from ATI website:
>>> > 2) Removal Instructions
>>> > a) Go to Add/Remove Programs located in the Windows Control Panel
>>> > b) Run the ATI Software Uninstall Utility. Restart the machine once
>>> > prompted.
>>> > c) (Should this utility not be present, it can be downloaded from the
>>> > CATALYST?- ATI Maintenance Utilities page.
>>> > d) Remove the DAO/MDAC component and any remaining ATI software from
>>> > Add/Remove Programs
>>> > e) Should items fail to remove, select the appropriate link below for
>>> > ways
>>> > on manually deleting items from the registry.
>>> > Windows XP:
>>> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q310750
>>> > Windows 2000:
>>> > http://support.microsoft.com/default.aspx?scid=kb;en-us;243723
>>> > f) C:\Program Files and verify that the ATI Multimedia folder no
>>> > longer
>>> > exists
>>> > (This folder may exist in another location, depending if the
>>> > installation
>>> > path was changed during the initial setup)
>>> > g) Empty the Windows Temp folder by going to C:\Windows\Temp
>>> > h) Verify that the ATI Technologies keys are removed from the Registry
>>> > by
>>> > performing the following:
>>> >
>>> > i. Click START, select RUN, and type "REGEDIT"
>>> > ii. Should references to ATI still remain, they will need to be
>>> > deleted.
>>> > First, create a backup of the Registry.
>>> > iii. From the menu bar, choose 'Registry', then 'Export'. Save the
>>> > registry
>>> > backup file to your desktop. Double-clicking the saved file will allow
>>> > you
>>> > to
>>> > reverse any incorrect changes made to the registry.
>>> > iv. Once the Registry has been backed up, proceed to remove any
>>> > references
>>> > to ATI from:
>>> >
>>> > HKEY_LOCAL_MACHINE>SOFTWARE.
>>> >
>>> >
>>> > i) Restart the computer
>>> > j) Close all other applications running, including any live monitoring
>>> > anti-virus software, before attempting to re-install the ATI software.
>>> > Windows 2000/Windows
>>> >
>>> > 4. After all the old ATI stuffs is successfully removed, reboot the
>>> > PC.
>>> > 5. Temporary disable any antivirus software by running msconfig and
>>> > disable
>>> > the antivirus software under the startup tab.. Make sure there is no
>>> > antivirus software is running at the background. Install the ATI
>>> > Catalyst
>>> > drivers that have burned on the CD. Do not disturb until you are
>>> > prompted
>>> > to
>>> > follow the installation instructions. After the ATI drivers is
>>> > successfully
>>> > loaded, adjust the display resolution to your desire.
>>> > 6. Re-install any burning softwares, Nero, Roxio, etc.
>>> > 7. Re-activate antivirus software by running msconfig again.
>>> >
>>> > Pls post back if it helps.
>>> >
>>> > Peter
>>> >
>>> >
>>> > "Lori A. Kuiper" wrote:
>>> >
>>> >> I am running Windows XP Professional. Video driver is 9200SE S80
>>> >> Stealth--ATI compatible. I downloaded the 5.3 drivers with
>>> >> integrated
>>> >> WDM.
>>> >> Usually since I have a dial up connection, I download the drivers in
>>> >> parts
>>> >> and only load the Driver and Control center since my card is not
>>> >> supported
>>> >> by the new Catalyst control center. When I previously installed the
>>> >> drivers, I was under the impression that only All in Wonder or VIVO
>>> >> products
>>> >> required the WDM driver and therefore did not install it. I did have
>>> >> trouble with my Generic Dual DVD RW/CD RW drive, however. This last
>>> >> time
>>> >> I
>>> >> loaded the driver with integrated WDM and now my DVD player hangs for
>>> >> along
>>> >> time before finally starting to play the DVD making a strange
>>> >> clicking
>>> >> noise. I looked in the Event manager and there are numerous errors
>>> >> related
>>> >> to the DVD all stating the same thing--ATI2mtag DVD.OV #62486.
>>> >>
>>> >> Why would the Integrated WDM drivers install if my equipment does not
>>> >> support it? Do I just need to unplug my DVD player and plug back in
>>> >> to
>>> >> see
>>> >> if XP will recognize correctly? Do I need to uninstall the entire
>>> >> 5.3
>>> >> drivers and then reinstall them in parts from the dial up section
>>> >> without
>>> >> the WDM drivers? There was some indication in the WDM release notes
>>> >> that
>>> >> said that the WDM drivers needed to be installed before the other
>>> >> parts
>>> >> of
>>> >> the driver.
>>> >>
>>> >> PLEASE HELP. This is the second time I have reformatted my drive and
>>> >> reinstalled XP which takes me almost a full week.
>>> >>
>>> >> I can't use the drivers from the manufacturer of the card since they
>>> >> are
>>> >> too
>>> >> old and cause errors.
>>> >>
>>> >> Which drivers do I need? My motherboard is an NF7-S v2.0 ABIT.
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>


.

Loading