Re: Same Problem!
- From: "erkan" <erkan@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 6 Apr 2005 11:07:07 -0700
Yes, you are right. But as I said BEFORE, I tried nearly all of NVIDIA
drivers that support Winfast FX5200, but none of them worked(I was sure that
I had uninstalled the previous drivers before I began to install the new
ones). I tried everything that might cause incompability! It should be a
driver problem, but current NVIDIA drivers cannot solve the problem..
"Bob I" wrote:
> IF YOU PROVIDE the drivers that MAKE it work in WinXP and it will work.
> It has NOTHING to do with WinXP and EVERYTHING to do with the drivers
> that mak it work.
>
> erkan wrote:
>
> > But the technical support people from Gigabyte didnt mention this compability
> > problem. They said that the card supports only AGP 1.0 and FX5200 requires
> > AGP 2.0. This seems like a problem, but I managed to make the card work
> > perfeclty under WinME! I just cant understand why it is not working only
> > under WinXP!
> >
> > "DKCoo" wrote:
> >
> >
> >>I Have A BX2000 Motherboard And Also Have The Same Problem With My XFX Nvidia
> >>Geforce FX 5200! I Found Out Just Now! That This Card Is Not Compatible With
> >>This Motherboard So I Am Getting A New Motherboard Which Is Very Cheap Around
> >>(£30-£50)
> >>
> >>"erkan" wrote:
> >>
> >>
> >>>I am beginning to think that WinXP has a definite problem here, becase my
> >>>system configuration is perfectly running under WinME which has not any
> >>>VgaSave drivers. I installed many drivers for my video card including the
> >>>latest ones(Winfast FX5200). I have updated bios and chipset drivers of
> >>>motherboard (GA BX2000+). I tried to configure BIOS settings of motherboard,
> >>>but unfortunately VgaSave is still running. I am really tired and thinking to
> >>>post this hardware problem to Microsoft!
> >>>
> >>>"erkan" wrote:
> >>>
> >>>
> >>>>But why do I have to put the battery out? Do you mean power supply by 'the
> >>>>battery' or what? I have updated my Bios and adjusted to the default settings
> >>>>many times in Bios Setup. Are there other settings which you cannot adjust to
> >>>>default in Bios Setup program?
> >>>>
> >>>>"DKCoo" wrote:
> >>>>
> >>>>
> >>>>>I Had The Same Problem, I'ts The BIOS What You Have To Do Is Open Up Your PC
> >>>>>And Take The Battery Out Then Put It Back In This Will Go Back To Default
> >>>>>Settings And Will Def Work!
> >>>>>
> >>>>>"Erkan" wrote:
> >>>>>
> >>>>>
> >>>>>>Hi all,
> >>>>>>My problem is that my new video card seems incompatible with WinXP Pro. But
> >>>>>>i have checked the compability of Winfast FX5200 with the signature verify
> >>>>>>program and there is no problem there. I cannot make it work properly! I
> >>>>>>tried to uninstall the drivers that came with the installation cd and
> >>>>>>downloaded the updated version from Leadtek's website. The problem is still
> >>>>>>there... I thought that there may be a problem with my motherboard(gigabyte
> >>>>>>BX2000+) and downloaded the latest inf files. It didnt work...
> >>>>>>Why VgaSave is running instead of my video card?
> >>>>>>I tried one more thing: I installed WinME instead of WinXP pro, and yes my
> >>>>>>card is running this time! I know that there is not VgaSave in WinME. Is the
> >>>>>>problem with this VgaSave driver or is there just a conflict between the
> >>>>>>drivers?
> >>>>>>I want to stay with WinXP pro, but this situation prevents me to work with it.
> >>>>>>PLEASE HELP!!!
>
>
.
- References:
- Graphic Card is not working...
- From: Erkan
- RE: Graphic Card is not working...
- From: DKCoo
- RE: Graphic Card is not working...
- From: erkan
- RE: Graphic Card is not working...
- From: erkan
- Same Problem!
- From: DKCoo
- RE: Same Problem!
- From: erkan
- Re: Same Problem!
- From: Bob I
- Graphic Card is not working...
- Prev by Date: USB storage device restarts over and over and..
- Next by Date: Re: Printing to a DFX-8500 on Fanfold 11" x 8.5"
- Previous by thread: Re: Same Problem!
- Next by thread: lost sound after a system restore
- Index(es):
Relevant Pages
|
