Re: XP Pro, Asus V9570 TD GCard and NEC 2010x LCD

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Tim (erat_at_NOSPAMblueyonder.co.uk)
Date: 11/05/04 

Date: Fri, 5 Nov 2004 15:06:29 -0000

Hi there,

This is Tim the problem is that my LCD always used to switch on and the BIOS
start up information was always visible now some times this is not the case
i.e. when I switch the computer and screen on all I will get is a blank
screen until I get to the Windows XP login box. That did not used to happen
and no I have not updated my BIOS and yes sometimes when this occurs the
green power light on the screen is on but still with a blank screen and
occasionally the amber light is on so before I have NEC swap out the LCD I
need to check if there could be any other reason for this odd behaviour?

Many thanks, Tim.

"Wislu Plethora" <wislu@plethora.com> wrote in message
news:%23a52Bb0wEHA.3260@TK2MSFTNGP10.phx.gbl...
>
> "Tim" <erat@NOSPAMblueyonder.co.uk> wrote in message
> news:e1ceJaqwEHA.2732@TK2MSFTNGP12.phx.gbl...
>> Hi there,
>>
>> MB Asus P4C800-E
>> Graphics card Asus V9570TD
>> NEC LCD 2010x
>> OS XP Pro SP2
>>
>>
>> I connect the NEC via DVI from the graphics card however not sure if this
> is
>> an OS or hardware problem I suspect hardware.
>>
>> The problem is that when I turn on my computer sometimes not every time
> but
>> most times the screen comes on for about 3 seconds to where the BIOS is
>> reading the raid array and then goes blank (black) then when the OS gets
> to
>> the login screen the screen comes back to life.
>>
>> During the black, blank screen time the power light on the NEC LCD can
>> sometimes be green and sometimes is amber. Now this has only just
>> started
> a
>> few weeks ago and I have done a format and clean install of the OS so I
>> don't think it is that, I am using the latest Asus V9570TD drivers but
> that
>> doesn't seem to have stopped the problem.
>>
>> Anyone any ideas?
>>
>> Many thanks, Tim & Ann.
>>
>>
>
> 1) Who is this, Tim or Ann?
>
> 2) You haven't described a problem as far as I can see. What is it that
> you
> want corrected, and why?
>
>

Relevant Pages

  • Re: SVGA, LCD, Win CE 6.0 and PB
    ... the Win XP ignores BIOS setting. ... travel down thru Win CE from boot.ini to the place genrating final LCD ... I drew more lines on my display. ... I can have a desktop larger than physical screen window. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: XP Pro, Asus V9570 TD GCard and NEC 2010x LCD
    ... > This is Tim the problem is that my LCD always used to switch on and the ... > occasionally the amber light is on so before I have NEC swap out the LCD I ... > Many thanks, Tim. ... What makes you think the monitor is at ...
    (microsoft.public.windowsxp.hardware)
  • Re: P4P800SE and BIOS - pages too small
    ... If lcd, ... onboard video or agp card, ... would indicate a display problem or something is wrong with the bios. ...
    (alt.comp.periphs.mainboard.asus)
  • BIOS with message like Dell 2850 and similar
    ... tell the bios to put something on each line. ... other motherboards w/ bios which support that? ... know what sort of LCD display i'd need to hook it to? ... Head of Sun Support, Sr. ...
    (comp.sys.ibm.pc.hardware.systems)
  • Re: LCD monitor and new MB problems
    ... > I need some understanding about LCD monitors and "Out of Range" in low video ... > in order to continue on to the BIOS and configuration, ... > of sync problem with the LCD. ... that may be causing this out of range out of sync problem? ...
    (alt.comp.hardware.pc-homebuilt)