Re: USB 2.0 detected as 1.1 because of SP2
From: utmba95 (utmba95_at_discussions.microsoft.com)
Date: 10/16/04
- Next message: peter: "Re: help"
- Previous message: David Hollway [MVP]: "Re: USB PCI card and drivers"
- In reply to: Jim Macklin: "Re: USB 2.0 detected as 1.1 because of SP2"
- Next in thread: Jim Macklin: "Re: USB 2.0 detected as 1.1 because of SP2"
- Reply: Jim Macklin: "Re: USB 2.0 detected as 1.1 because of SP2"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 15 Oct 2004 17:33:01 -0700
Thanks for the try, but I've already tried that 5 times. That's why I said
"Anybody have ideas - other than reinstall the USB drivers or the chipset
drivers?"
I finally gave up on USB2.0 and set my BIOS to USB1.1. Now I can at least
use my peripherals, albeit slowly. It's better than nothing.
If you google USB + "service pack 2" you'll see tons of people are having
this problem, and deleting the USB devices and reinstalling the drivers does
not work for everybody. Hopefully Microsoft is working on a fix.
"Jim Macklin" wrote:
> Open device manager and delete ALL the USB devices and the
> ports and hubs, too. Disconnect the devices and reboot. You
> should get a clean install of the USB drivers and then
> reinstall each device, one at a time.
>
>
> --
> The people think the Constitution protects their rights;
> But government sees it as an obstacle to be overcome.
>
>
> "utmba95" <utmba95@discussions.microsoft.com> wrote in
> message
> news:0A0704D6-F0FC-40FC-9FBF-D10191DA8524@microsoft.com...
> | Mike, I feel for you. Microsoft completely screwed the
> pooch on this. I
> | have the same problem where device manager says Enhanced
> USB device but any
> | USB2.0 device I plug in is "unrecognized". I can't use my
> scanner or my USB
> | flash drives. If you search the internet, lots of people
> are having the same
> | problem. Mine worked fine with SP1, and I can't go back
> because I had some
> | network problems that were fixed by going to SP2. I'm
> pissed that I can't
> | use my scanner and USB drives. I tried loading the SP1
> USB drivers and that
> | didn't work either.
> |
> | Anybody have ideas - other than reinstall the USB drivers
> or the chipset
> | drivers?
>
>
>
- Next message: peter: "Re: help"
- Previous message: David Hollway [MVP]: "Re: USB PCI card and drivers"
- In reply to: Jim Macklin: "Re: USB 2.0 detected as 1.1 because of SP2"
- Next in thread: Jim Macklin: "Re: USB 2.0 detected as 1.1 because of SP2"
- Reply: Jim Macklin: "Re: USB 2.0 detected as 1.1 because of SP2"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|