Re: wireless-g notebook adaptor

From: D.Currie (dmbcurrie.nospam_at_hotmail.com)
Date: 08/05/04


Date: Thu, 5 Aug 2004 13:20:23 -0600


<anonymous@discussions.microsoft.com> wrote in message
news:0dbe01c47b1b$b6730060$a401280a@phx.gbl...
> I know it works it will pick it up for adhoc but not for
> networking it is just a pain in the a*** that microsoft
> earn all that money selling products but they cant be
> bothered to help unless you goto their premium rate tel
> numbers
> cheers for the advice Bri

Um, did Microsoft make the card and router? They do the tech support of for
their products, not for every manufacturer on earth who makes something you
can use with the computer. If you think about it, it makes sense. MS tech
support isn't going to have all that hardware and all that software at hand,
so they can tell you what you should be seeing, what you should be clicking
on, and what the hardware should be doing at each stage. Only the
manufacturer would have details like that. MS might be able to give you some
general advice, but when it comes to details for specific products, they
aren't going to have that information to give you.

If the manufacturer won't support the product, they're the people you should
be mad at, and you should be calling them, or see if they have a website
with advice, faqs or forums. I'm not talking about the place you bought the
product, as another poster suggested, I'm talking about the manufacturer of
the product.

And even though it works sometimes, it doesn't mean it's not defective in
some way, or that the manufacturer's software doesn't have some problem. I
had a card that was going bad, and the first thing it did was refuse to see
the router, although it did want to connect to another nearby computer.

As far as getting help here, it might be useful to post the
model/manufacturer of the card and router, and maybe somebody here has the
same one and can help you. Without knowing that, and without knowing how you
have your network set up, or what you've done so far, the best you're going
to get is a bunch of wild guesses. My first one would be that there's a
problem with the encryption settings somewhere.

But really, setting up the wireless shouldn't be this difficult, and if it
is, I'd still suggest returning the product. I've got mis-matched
components, and it all connects just fine. The setup was almost automatic,
with easy instructions from both the router's manufacture, and with each
card as I installed.



Relevant Pages

  • Re: Question installing a WIC
    ... It is supported by this router, so I though it should be ... plug-and-play like any ethernet or serial card I have tried to install. ... I believe you need at least 12.2ZL or newer trains to support the ... mainline code on the 2600XM to support this card. ...
    (comp.dcom.sys.cisco)
  • Re: update: ipaq3600 + sandisk CF WiFi+128m
    ... In my case I had set it to Shared-key, ... > After studying my router settings regarding wireless my ... > card requires "shared" (their support people are probably unaware of it). ...
    (microsoft.public.pocketpc.wireless)
  • Re: Recommendation: Proxima Orinoco 802.11a/b/g gold combocard?
    ... I have been looking for a while to find a router and a wifi card that would works under linux ... then I did not try personnaly but you might want to check the card out... ... Router Netgear WGT624FS ... > support the atheros chipset. ...
    (Fedora)
  • [patch 000/176] Video4Linux Updates
    ... Support for em28xx based usb2 boards; ... -Don't enable gpioirq until after card probe. ... -Some changes to allow compiling cx88 and saa7134 without ... -Fixed settings for MSI Vox USB 2.0 ...
    (Linux-Kernel)
  • Re: Help needed in rec.audio.pro
    ... > Rewire you can add even more to your environment (like Reason, FL Studio, ... Linux also has LADSPA and some VST's work as well. ... I have that card (sblive! ... Emu support seems to exist now. ...
    (comp.os.linux.misc)