Re: Gigabyte motherboard

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Nathan McNulty (nospam_at_msn.com)
Date: 07/18/04


Date: Sun, 18 Jul 2004 12:13:45 -0700

Yes, you want to make sure that your memory modules are the same so that
you can run them in Dual Channel. If you are currently running them in
Dual Channel Mode, this may be the cause of your problem. There are some
issues with Dual Channel and the amount of memory not being reported
properly. I highly recommend making sure you are running the latest
BIOS which would be F5 (DO NOT USE F6a as it is still in Beta). Here is
a link for your BIOS updates:

http://www.giga-byte.com/Motherboard/Support/BIOS/BIOS_GA-8S655FX.htm

----
Nathan McNulty
Tom wrote:
> "Carlos" <cluizlondon23@hotmail.com> wrote in message news:2e51001c46cda$5eed3210$a601280a@phx.gbl...
> 
>>I just bought a motherboard Gigabyte 8S655FX. I am trying 
>>to upgrade my memory from 512 to 1024, bu for some reason 
>>it only shows the 512. Is there anything I can do to make 
>>the system recognize the other memory. The motherboard 
>>has 4 slots, so I suppose it would take up to 4GB of 
>>memory.
> 
> 
> Did you read the manual? Your new MOBO can handle up to 4gigs, but it is what configuration you have of RAM, and then configured in the MOBO. Then they must match in all aspects in each slot. When booted to Windows XP (as is 2000, and NT4.0), it is not very good with mixing different types of RAM as is 98/ME. Be sure each module is matched, and that the RAM is of good quality.
> 
> Check that the RAM is also good, and not faulty if you meet the above specs. You can do this by removing the modules , and using individual one as needed and booting up.


Relevant Pages

  • Re: Memory question
    ... motherboard supports dual channel memory, ... A single channel Nforce2 motherboard, versus a dual channel ... is the Nforce2 chipset is ...
    (alt.comp.periphs.mainboard.asus)
  • Re: DDR2 vs. Dual Channel DDR2
    ... Maybe what I should do is order some Dual Channel memory and see what ... I'll need to decide if I should try Dual Channel ... GX620's with 1GB ram on each. ... would it be true that if I install Dual Channel RAM and insure they ...
    (microsoft.public.windowsxp.hardware)
  • Re: Fortune:More for your money with Mac
    ... and quad channel memory. ... Macs use SATA drives and dual channel memory. ... The Mac Pro has a quad channel controller, ... Why doesn't Apple have this on the Mac Pro's spec page? ...
    (comp.sys.mac.advocacy)
  • Re: Help! I already ordered the RAM Was it right?
    ... I've not heard of any x4 chips being used on 512MB DIMMs. ... The best memory config for a S939 board, ... When operating in this mode the DRAM interface never operates ... 1GB module and run 2x1GB in dual channel mode. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Memory RAM Upgrade
    ... a four stick configuration usually ends ... overclock speeds on the memory bus. ... There is a difference between single channel and dual channel ... high density RAM is a mistake. ...
    (microsoft.public.windowsxp.hardware)